5 reasons why the vacuum cleaner does not suck up dust - what to do, how to solve the problem?


Often when cleaning, the vacuum cleaner begins to suck air poorly and loses its ability to collect debris. The problem can usually be easily fixed by cleaning the filter. But if the lack of traction is due to a serious breakdown, the device will have to be disassembled. We'll tell you what to do if the vacuum cleaner doesn't suck well in this article.

Relevant for all popular brands and models of vacuum cleaners: Ariete, Dyson, Bork, Bosch, Bissell, Electrolux, Gorenje, Hoover, Karcher DS, WD ; Kirby / Kirby, LG Kompressor, Storm Extra / LG (LZh) Compressor, Storm Extra; Miele / Miele, Panasonic / Panasonic, Philips / Philips, Rowenta / Rowenta, Samsung Air Track / Samsung Air Track, Scarlett / Scarlet, STIHL / Shtil, Supra / Supra, Tefal / Tefal, Thomas Twin / Thomas Twin, UNIT / Unit, Vitek / Vitek, Zanussi / Zanussi, Zelmer Clarris, Solaris Twix / Zelmer Claris, Solaris Twix; Aggressor, Ural and others, including electric and vacuum cleaners with an aqua filter.

So, let's go!

What to do if the vacuum cleaner does not suck? We are looking for the cause of the breakdown

In the lion's share of cases, problems are fixable. Five problems and solutions in the table:

CauseWhat to do
Filled bagClean reusable, change disposable
Clogged filterClean it or change it
Damage to the deviceChange what's broken
Blockages in the hose, brushes or tubeCheck the draft without the “suspected” part. If the device is working at full capacity without it, check for damage and remove any blockages.
Broken motor or batteryContact repairmen

The vacuum cleaner does not pull well for one of these reasons. The help of specialists may be needed only in case of engine failures. In other cases, a few free minutes and accuracy while working are enough.

The right choice: Which vacuum cleaner is better - wired or wireless: 3 points to “think about”

Question answer

What are the main reasons for a vacuum cleaner to overheat?

  • clogging or damage to components,
  • dust bin overflowing with garbage,
  • engine malfunction,
  • dirty filters.

Malfunctions should be checked in the following order:

  1. disconnect the hose - if without it the device heats up less, a blockage or kink does not allow air to flow, or the problem is in the telescopic tube;
  2. inspect the inlet of the vacuum cleaner for foreign objects;
  3. check how the device works without a dust collector;
  4. examine the condition of the filters;
  5. check the engine.

Why did the vacuum cleaner become loud?

Engine breakdown, failure of one or another component, bag filled with garbage (dust penetrates into the engine compartment).

If the engine is seriously damaged, it is better to purchase a new vacuum cleaner: replacing the motor is not economically feasible.

Full dust bin

Often the vacuum cleaner does not pull at full power due to the dust container being filled to the top. Problems begin as soon as the garbage takes up more than 2/3 of the bag's capacity. Waiting is the same as death. It is necessary to solve the problem as soon as the device begins to “weaken.” This can be done using one of the methods below.

1. Replace the dust collector with a new one. Option for paper collectors, like the Karcher WD 3 P. This one is designed for one-time use.

2. Clean the bag thoroughly. If the device has fabric dust collectors like the Samsung VC07M25H0WB/UK, they can be used 2-4 times. To do this, you need to carefully shake out the garbage, rinse the collection under running water and let it dry.

However, fabric bags do not last forever and wear out over time. On average, they are enough for 3-4 washes, and then the quality of cleaning will deteriorate. The best solution would be to buy a set of bags. When one “lives out its days,” it is replaced with a new one.

What do men like during oral sex?

Blowjob is a pleasant caress, but there are some things that are especially pleasant for a man:

  • The entire penis is not an erogenous zone. Its trunk itself is not as sensitive as the head, neck of the head and frenulum. There are also many nerve endings on the lower part of the trunk. The most pleasant caresses of these parts will be.
  • Sometimes light touches of the teeth are very stimulating. This should be gentle touching, not biting. For the greatest effect, it is advisable to keep the same rhythm.
  • Stimulating the penis and testicles with your mouth and hands at the same time enhances the sensations.

The filter is clogged

Another popular reason why the vacuum cleaner does not pull. And the solution here is similar to bags: foam rubber ones are washed and used several times. It is better to change paper ones as soon as they become dirty.

But when working with HEPA filters, you need to understand their type. The usual one will have to be thrown away as soon as it becomes clogged (after 45-55 hours of operation), but the fluoroplastic ones (marked W) can be washed and installed a second time. However, you need to take into account that it will no longer give out the original “power” of filtration. Each time she will become weaker. So it’s better to have 2-3 spare filters at home - they won’t be superfluous.

Educational program: How to clean carpets at home: 10 best tips

Basic mistakes

Women learn how to give a blowjob from pornographic films, where the actions of actresses are aimed only at entertainment, and not at the pleasure of their partner. Now there are blowjob courses that teach you from scratch and help you avoid common mistakes.

  • Influencing only the head is a big mistake, since this part can lose its sensitivity if overstimulated. We must not forget about other parts of the genitals. There are many nerve endings on the scrotum.
  • You should not start and end oral sex abruptly. Men, like women, need time to tune in.
  • You should not give a blowjob too intensely - the act will end quickly, but will not differ from regular masturbation. Speed ​​makes the partner think that the girl wants to finish the caresses as quickly as possible; they are unpleasant for her.
  • The monotony of movements leads to the fact that a man stops enjoying oral sex. Ejaculation occurs, but there is no moral satisfaction, and it plays an important role, as well as physiological. Therefore, it is better to change and add new movements and caresses.
  • You need to give a blowjob without tension. Any sexual contact, except violence, is joy and relaxation. Strenuous activities cause discomfort.
  • Don't hide your face during a blowjob. Inexperienced women think that they look stupid and ugly at such moments, but men perceive it differently. The partner's face during a blowjob excites them very much.
  • Having oral sex without making any sounds is also wrong. When a girl shows with moans and sighs that oral sex brings her pleasure, then the excitement and pleasant sensations for her partner will be many times stronger.
  • If a woman is not ready to swallow semen, you need to discuss this in advance, as well as other intimate details. At least on a like-dislike level.

Mechanical damage to the gadget

The source of problems can be minor breakdowns of the device itself. If something goes wrong, you should inspect the vacuum cleaner for:

  • Cracks

Every centimeter should be examined - from the body to the accessories.

  • Dents on the body

If the device has recently been “flying,” a fall could damage it. So keep an eye on the vacuum cleaner. It is better to replace deformed parts to prevent global breakdown.

  • Broken nozzles

Everything wears out, and brushes are no exception. In most cases they will have to be replaced.

Educational article: The best bread makers for home 2021: review of the TOP 9 models

Problems requiring repair

Without basic knowledge of electrical engineering, diagnosing the cause of an engine malfunction is quite difficult. It must be removed from the housing, disassembled and all circuit elements tested with a multimeter.

The motor winding burns out

If the engine is fully operational, it may spark slightly due to dust getting on the brushes (and smells burnt). But strong sparking is already suspicious.

One of the reasons for sparking may be a short circuit in the armature winding: then it is necessary to rewind or replace the rotor. The stator winding is checked by measuring the resistance - if it is different in several parts, the winding is rewound or changed.

Graphite brushes are worn out

The brushes no longer fit closely to the commutator contacts for two reasons: wear and low-quality materials. Poor contact negatively affects the starting and further operation of the engine.

The fact that the brush has become unusable can be determined by examining it. Most often, replacing the carbon brushes will help. If you cannot remove it, change the springs and brush holder.

Thermal fuse problems

If a fuse fails, it must be replaced.

The hose, tube or brushes are clogged

“Accessories” are brought under the monastery at the most inopportune moment.

It wouldn't hurt to look at three weak points.

1. The hose may not be fully inserted into the socket. It needs to be removed and put on again. If the corrugation is leaky, you will have to replace the hose with a new one.

2. The brush may become clogged. Remove dirt from it manually. If the vacuum cleaner has a roller brush, it wears out over time, then only replacement.

3. Check the pipe Some vacuum cleaners have a suction power regulator on the handle - in the closed position it releases power for the main work. By opening it slightly, the user reduces the suction force. It should be set to “closed” mode.

Topic: Which vacuum cleaner is better for cleaning hair: 9 “correct” models to choose from

Checking components

The worst problem for a vacuum cleaner is motor failure. You can identify such a malfunction by touching the body with your hand. If household appliances become very hot, then most likely the reason is in the motor. Also, the engine may turn off periodically.

Video: cleaning and repairing the engine using the example of a Samsung vacuum cleaner

In this case, it is necessary to remove the housing protection and use a multimeter to ring sections of the circuit. The most common cause here is a blown fuse. In this case, you simply need to replace the component.

If the winding on the coils breaks, it is recommended to purchase a new vacuum cleaner, since purchasing a new motor is not economically feasible. If the contact is simply broken at the junction of the wires, repairs will not be difficult. The main thing is skill and experience working with a soldering iron.

Expert opinion

Viktor Pavlovich Strebizh, lighting and electrical expert

Any questions ask me, I will help!

If the problem is that the vacuum cleaner does not pull and turns off due to the motor brushes that you decide to replace, be careful when connecting them. If there is something you don’t understand, write to me!

Engine damage

Often the vacuum cleaner has no traction due to problems with the motor. It should be cool or lukewarm during operation. If the surface on the vacuum cleaner gets hot, you need to contact service.

Regular shutdowns during operation also indicate problems with the engine or battery. Most of all, the fuse broke. And the situation can only be resolved by replacing it.

In addition, you need to check the device for broken contacts. More often they break at the junction of the wires or in the area where the cord rubs against the corners and walls of furniture. Replacing the cable will save the situation.

But if there is a break in the windings, you will have to fork out money. Here the price for repairs is 60-90% of a new device. It's easier to buy a new one than to overpay for repairing old ones. But since failures with the engine are rare, it is not problematic to repair the vacuum cleaner yourself. You just need to listen to the advice described above!

Honest comparison: Which is better - a washing vacuum cleaner or a steam cleaner: 4 differences, comparison and tips for choosing

Sexologist's opinion about oral sex

Professionals say that oral sex has a good effect on family life. A husband and wife who practice fellatio spend more free time together and do not avoid communicating with each other during the day.

In such families, according to sexologists, there are seven times less quarrels than in couples who do not accept oral sex. According to the observations of doctors, men in such couples do not experience problems with sleep, they fall asleep faster, they are not bothered by nightmares and insomnia.

And according to social surveys, husbands who receive oral sex often dream about their spouses. Whereas, on the contrary, in couples where blowjob is prohibited, husbands more often see unfamiliar or strange women in their dreams.

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]