LED floodlight with light sensor: TOP-5 best offers on the market + selection criteria

Updated: 02/21/2021 14:08:28

Expert: Konstantin Borisovich Polyakov

*Review of the best according to the editors of expertology.ru. About the selection criteria. This material is subjective in nature, does not constitute advertising and does not serve as a purchase guide. Before purchasing, consultation with a specialist is required.

Light sources that turn on when motion is detected help save energy and do not require a mechanical switch. This allows you to illuminate steps, a corridor, or a courtyard without using your hands. Such devices operate with infrared waves that register the presence of a person when they enter the sensor’s coverage area. Let's consider how to choose a floodlight that reacts to movement, and which models are recognized as the best in the Russian Federation.

How to choose a floodlight with a motion sensor

If you want to buy a lighting device whose sensor will be activated when you move, pay attention to the following characteristics:

1. Power.
   Varies from 1 to 50 W and above. The higher the number, the brighter the lamp will shine, but the faster the charge will be consumed in the case of an autonomous power source.
2. Brightness.
   Measured in lumens. It can range from 100 to 5000 lm. The higher the number, the better it will be visible. For example, the brightness of a regular 100 W incandescent lamp is 1200 lm.
3. Colorful temperature
   . It is measured in Kelvin and can be from 1000 to 7000 K. Good white light is possible at 4000 K. Lower values ​​will give a yellowish effect, and higher values ​​will give the light a blue color.
4. Degree of dust and moisture protection.
   Floodlights with an IP44 rating can be installed outdoors without additional canopies or awnings. Lanterns with lower values ​​require additional shelter or are intended for indoor use.
5. Nutrition.
   Some spotlights are powered from a 220 V network, for which you will have to connect a line to them. Others get their energy from batteries or batteries. Then they need to be periodically charged or changed. Still others come from solar panels and batteries. This is the most autonomous type that does not require the user’s attention, but they are more expensive.
6. Case material.
   Plastic does not rust, but is less resistant to vandals or hail damage. Metal is stronger, but individual elements can oxidize.

Rating of the best floodlights with a motion sensor

The best floodlights 1-10 W with motion sensor

Models with power up to 10 W inclusive produce rather limited light. This is the best option to illuminate the porch or the area in front of the entrance to the apartment. This will make it easier to find the keys in your bag and open the door, as well as see through the peephole or window who came.

Ritex LED-265 7 W

Rating: 4.9

The spotlight is made with two lamps that can be directed to one zone or 180 degrees from each other. This allows you to independently model the illuminated space depending on your changing needs. With a power of 7 W, the model emits 600 lumens. The LED lamp is suitable for both indoor and outdoor use. The device is powered by batteries. In addition to the motion controller, there is a light sensor, so the lamp will not turn on during the day. Reviews praise the product for its clear motion response, bright white light and trouble-free operation. IP44 protection is enough for outdoor work, even with regular precipitation. At the same time, the plastic body does not rust, which means the spotlight will retain its attractive appearance for a long time.

Experts liked the model with the sensor due to its universal mount. At the base of the bracket there are 4 holes for self-tapping screws to fix the spotlight on the wall or ceiling. If pipe/beam/mast mounting is required, long lag screws and a counter crimp plate are provided.

Advantages

• universal mount;
• two multi-directional lamps;
• IP44 housing protection;
• 2 year warranty.

Flaws

• battery powered;
• power supplies are not included;
• high price.

Ritex LED-225 2.6 W

Rating: 4.8

And here is another model from the same manufacturer, only with less power - 2.6 W. Structurally, the spotlights are similar - there is a rotating base with a bracket and two separate lights that rotate on their own hinges. This allows you to customize the light supply as you wish. The brightness level of 220 lm is much lower than that of the product described above, but it is enough to enter a gazebo or to illuminate a dark section of a yard path. According to reviews, the sensor responds without delay, and the body withstands precipitation well. Owners also like the light weight of 400 g, which allows the lamp to be attached anywhere.

We have highlighted the spotlight as one of the most energy-efficient batteries. With a power of 2.6 W, three finger devices will last all summer and you won’t have to climb to it often to replace power sources.

Advantages

• 2 year warranty;
• favorable location of the sensor;
• two lanterns;
• economical energy consumption.

Flaws

• low light 220 lm;
• high price.

How can you adjust the detector?

In modern motion sensors (MS), you can adjust the sensitivity, illumination, delay time for turning off the light and installation angle.

All these parameters, when properly configured, can save up to 50% of energy, which is a very significant figure. However, it should be immediately noted that not all motion sensors have three controls. In older models, you can adjust only two parameters - delay time and sensitivity, or delay time and light level, as in the photo below:

We recommend viewing the instructions, which explain how the detector works:

Now we will look separately at how to set up a motion sensor on a spotlight or other type of lamp.

The best floodlights 15-20 W with motion sensor

The power of floodlights of 15-20 W provides twice as much light as the category described above, so they are used to illuminate entrances to basements, on dark corners of the yard, on the way to outbuildings, and at entrances.

Ritex S-90L 15 W

Rating: 4.9

This is the flagship model with a motion sensor from the manufacturer Ritex. The spotlight has three independent lights that can be configured at your discretion. The total power of the device is 15 W, which generates a brightness of 1400 lm. This is larger than a regular 100W incandescent lamp, so everything is clearly visible from the flashlight. The light source is powered by a solar battery and there is no need to change anything periodically. The spotlight is connected to the solar panel with a 5 m wire and it can be removed remotely so that more light falls on it. The 3600 mAh battery stores enough energy, and the light sensor helps to spend it rationally, only in the dark. Reviews show that the spotlight does not “hit” the eyes and gently diffuses the light.

We highlighted the product for its ability to work in security mode. This is relevant for those who are periodically absent from home at night (work schedule, travel) or for commercial enterprises. If someone approaches the entrance at a distance of 8 m, the lamp will light up for 5 seconds. If you continue to move, the lamps will begin to flash for 20 seconds, which immediately attracts attention and has a deterrent effect on intruders.

Advantages

• runs on a solar battery;
• three separate lights on the platform;
• there is a light sensor;
• can work in security mode.

Flaws

• very high cost.

Novotech Armin 357533 20 W

Rating: 4.8

A rectangular spotlight with dimensions of 15x17x4 cm weighs 590 g and is attached to a wall, column or ceiling using a metal arc. The internal contacts are protected from precipitation at the IP65 level, and the manufacturer allows the lighting device to be used outdoors at temperatures down to -20 degrees. The light source emits a 4000K flux, which is pleasing to the eye. To connect, you will need to extend a 220 V line, but the wires here are thick and reliable. The motion sensor is built into the frame of the case and reacts quickly when an object enters the trigger zone. You can direct the flashlight to any place using an adjustment range of 0-120º.

And again, a product from the Novotech brand with a motion-detecting sensor is superior to other analogues in brightness. Here the luminous flux is 2200 lm. This is similar to the brightness of a 170W incandescent lamp and provides excellent illumination of steps and other hazardous areas to prevent tripping due to poor visibility.

Advantages

• durable bracket;
• brightness 2200 lm;
• ability to work at -20 degrees;
• pleasant daylight white light.

Flaws

• When used outdoors, oxidation of individual housing elements is possible.

Feron LL-906 20 W

Rating: 4.7

The model with a motion sensor is made of black painted metal and has dimensions of 16x12x5.3 cm. There are 15 diodes inside, and the total power of the spotlight is 20 W. This is enough to generate a luminous flux with a temperature of 6400 K and a brightness of 1900 lm. The manufacturer assures that the lamp life will last for 30,000 hours. The device is connected to a 220 V network, but only an output without a cable is provided, so you will need to disassemble part of the housing. The weather protection rating is IP44, and the diodes are covered with durable frosted glass. The device is suitable for outdoor use and is vandal resistant. The sensor is located below the frame of the flashlight and responds perfectly to movements both below it and from the front.

A spotlight with a power of 20 W is allowed to operate at temperatures down to -40º C. This is an excellent option for northern regions or inside freezers that store large volumes of products for commercial sale.

Advantages

• durable glass that protects the diodes;
• sensitive sensor;
• Can be used at temperatures down to -40 degrees;
• 2 years warranty.

Flaws

• To connect, you will need to disassemble the case.

Volta WFL-20W/05s 20 W

Rating: 4.7

Next is an outdoor floodlight with compact dimensions of 10x14.3x4.8 cm. It has a vandal-resistant body with thick glass and a built-in motion sensor. Inside there are 39 diodes with a total power of 20 W, generating a brightness of 1600 lm. The light has a pleasant color temperature of 5500 K. The spotlight is protected from dust and moisture at the IP65 level and can be safely used outdoors. The service life of the product is stated to be 50,000 hours, but much depends on the correct connection, location and duration of use per use. In reviews, buyers note the sensitivity of the sensor at a distance of 3 m and bright lighting.

This spotlight is able to work correctly and turn on when there is movement, even if the network has a low voltage of 180 V. We recommend that owners of summer houses and residents of villages where “weak” power lines are stretched or there are many consumers take a closer look at the product. Other spotlights may simply not turn on during drawdowns or shine too dimly.

Advantages

• sensitive sensor;
• compact dimensions;
• durable metal case;
• pleasant light 5500 K.

Flaws

• Some people burn out quickly.

Main conclusions

Regardless of whether the spotlight is intended for a house in the center of Moscow or for a distant countryside, when choosing it you need to be guided by clear rules:

1. The device must correspond in power, viewing angle, sensitivity threshold to the location and area of ​​illumination.
2. The device must have a reliable sealed housing, the electronics must be in good working order, and the light source and sensor must be fault-free.
3. The spotlight and its detector must have a warranty from the manufacturer.

After purchasing the device, it is important to install it correctly, connect it according to the attached diagram and configure it in accordance with the operating conditions.

Previous

SpotlightsHow to repair LED spotlights yourself

Next

SpotlightsHow to connect a photo relay to an LED spotlight yourself

The best floodlights 30-50 W with motion sensor

Products in this category are designed to illuminate the street near the house, the entrance to the garage, gate, and local area. They provide enough light to clearly see the boundaries of an object and the faces of people on it, making floodlights suitable for security systems.

STAYER Profi 57133-30 30 W

Rating: 4.9

The spotlight with a power of 30 W is equipped with 28 LEDs and generates a flux with a brightness of 2400 lm. This is a cool white light of 6500 K, in which any details are clearly visible. The flashlight is designed for a service life of up to 30,000 hours. The device is fixed on a metal arc, and the sensor for motion recognition is placed down on a durable steel tube. Dust and moisture protection IP65 allows you to hang the lantern outdoors.

According to reviews, the spotlight is praised for its convenient adjustments. It is adjusted according to three indicators: sensor sensitivity, light switching delay and brightness. Users also praise it for its sealed design and resistance to heavy rainfall. Despite the budget price, the sensor detects movement at a distance of 10 m, so the entire yard will be illuminated as soon as you enter the gate.

Advantages

• tolerates rain well;
• wide possibilities for adjustment;
• detects movement at a distance of 10 m;
• You can set continuous burning for 8 hours.

Flaws

• the adjustments are written in English (Time, Sens, Lux).

Volta WFL-50W/05s 50 W

Rating: 4.8

One of the “older” models with a motion detection sensor in the Wolta line is the WFL-50W floodlight. It uses modern diodes with a width of 11 mm, so the service life of the light source is longer and is 50,000 hours. The manufacturer provides a 2-year warranty on the product. The degree of pulsation is less than 1%, which means that with prolonged illumination you will not see the “flickering effect”. The relatively thin 6.5 cm body allows installation in limited spaces. One module combines light and motion sensors so that the spotlight turns on only when there is little light around. The flow temperature is 5500 K, which gives optimal visibility of small details - you can even read underneath it.

Among powerful floodlights equipped with a motion sensor, this one stands out for its increased brightness. The device emits a luminous flux of 4000 lm. Thanks to this characteristic, the lantern is suitable for illuminating a spacious area near a cottage or for protecting industrial facilities.

Advantages

• good sensitivity of the motion sensor;
• durable vandal-resistant housing;
• works correctly at reduced voltage 180 V;
• very bright light 4000 lm.

Flaws

• loses to others in terms of radiation angle of 120º.

Glanzen FAD-0012-30 30 W

Rating: 4.7

The spotlight from the domestic manufacturer Glanzen has a power of 30 W and produces a luminous flux with a temperature of 6500 K and a brightness of 2500 lm. It is specially designed for difficult climatic conditions and can withstand temperatures from -40 to +50 degrees. The case with dimensions 31x18x4.3 cm is made of metal, but weighs 1 kg, so it needs to be fixed on a solid base. The model is powered from a 220 V network, for which a cable outlet is provided. The first class of electrical safety means that fires from the spotlight or electric shock are excluded. Reviews show that if you set the operating time to 10 seconds, the board will not overheat and can last the stated 50,000 hours.

The domestic floodlight stands out for its affordable price - lower than some options on AliExpress. At the same time, it has the same adjustments as more expensive models. It also provides protection for the chip from overheating, which extends its life.

Advantages

• there is a sensitivity setting for the motion sensor;
• adapted to sudden changes in ambient temperature;
• large angle of illumination;
• protection against chip overheating is provided.

Flaws

• weighs 1 kg, so it should only be fixed on a solid base;
• short wire.

Advantages and disadvantages

Installation of such equipment will bring a lot of convenience to the user. LED spotlights have a lot of advantages:

• wide scope of application;
• efficiency – low level of electricity consumption, moderate price of the device itself;
• long service life - the indicator exceeds that of analogues by 3 times;
• reliability, resistance to damage, falls, shocks, and vibration;

• minimum maintenance - LEDs do not need to be replaced, except very rarely;
• excellent results in illumination of the territory - achieved through intense illumination;
• the ability to use at almost any possible ambient temperature – from -60 to +50 degrees;
• high protection from dirt and water (the protection indicator differs for different models).

A big plus is that there is no need to search for a switch - the light will turn on without outside intervention. During the day, the device will quietly “rest” without wasting power from the network. There are few disadvantages to floodlights:

• when the control unit is automatic, the sensor will be triggered by the movement of animals, so regular unnecessary activation of the device is possible;
• if shutdowns and starts are too frequent, the device’s lamps will soon have to be replaced;
• Some devices turn off after a certain time, which can be inconvenient if you need lighting at the moment.