The best split systems for apartments in 2022: top 11 rating by price and quality

Any person strives to surround himself with comfort. But it is hardly achievable when the summer is extremely hot, and in the winter you have to layer your clothes on yourself, trying to stay warm even indoors. And users try to solve this problem by choosing a good split system. It can quickly heat and cool air to a specified temperature, while occupying a minimum of space in the room. But even if it suits you, the air conditioner can simply ventilate the room. Our TOP, where the best split systems are presented, will tell you which device to choose based on your requirements. For convenience, we have divided it into 3 groups, and you can immediately go to the desired category.

The best split system companies

Today there are dozens of air conditioner manufacturers on the market. However, not all of them are worthy of attention, since many nameless companies produce, although cheap, but too mediocre equipment. In this case, which company’s split system is better? We can highlight the top five. But you need to understand that the division into places is conditional, and all brands deserve your attention:

Electrolux . One of the leading manufacturers of household appliances. Every year the company supplies about 70 million of its products to more than 150 countries.
Ballu . The key direction of this concern is the production of climate control equipment for ordinary consumers and corporate clients. The quality of the company's devices has been repeatedly noted not only by customers, but also by awards.
Hisense . This is the case when the phrase “Chinese company” does not mean anything bad. Initially, the manufacturer focused on the domestic client, but excellent quality allowed it to enter the international market.
Toshiba . The Japanese, who need no introduction to anyone. Particularly interesting in the company’s assortment is the middle class of split systems. Functionally, it is not very impressive, but in terms of reliability, price and quality it beats its competitors.
Roda . Manufacturer from Germany – and that says it all. The brand concentrates on the production of heating and air conditioning equipment, which allows it to monitor the quality of the entire line of equipment and offer customers innovative solutions.

Video and useful video on the topic

The consultant shares tips on choosing climate control equipment:

Buying an air conditioner is always a long and scrupulous process. Especially for those who have never done this before.

But if you take into account all the above tips, correctly calculate the power and decide on the set of functions, then you can get a device that will make the microclimate in your house or apartment truly comfortable .

Do you want to supplement the above material with advice on choosing or focus on the products of another worthy manufacturer, whose name we did not mention in this article? Write comments in the block below, express your opinion, and do not hesitate to ask questions to our experts.

The best inexpensive split systems

Choosing cheap equipment is a very difficult task. It is in this category that there is the greatest variation in the price-quality ratio of air conditioners for an apartment. Such split systems are assembled mainly in China, which means that among them there are many mediocre solutions that are not intended for regular use. So that you don’t have to look among hundreds of options for truly worthy representatives who can please you with their work, we decided to personally select the four best cheap models.

Good split systems in terms of price and quality are presented in the catalog on the ProComfort website, which can be found at the link .

Roda RS-A07E/RU-A07E

If you choose a split system based on reviews from real customers, then it is impossible to ignore the RS-A07E model manufactured by Roda. There are 4 speeds, an anti-ice system and the ability to adjust the direction of the air flow. The latter, by the way, reaches 7 cubic meters per minute at maximum productivity.

Another significant advantage of a German brand air conditioner is its low noise level. Even at maximum power it does not exceed 33 dB, and the night mode reduces the volume to 24 dB. The device will be most effective in rooms measuring 15-20 square meters, but the area declared by the company is slightly larger.

Advantages:

ease of management and configuration;
price from only 12 thousand;
ease of installation;
very quiet operation;
design and assembly;
productivity.

Flaws:

There is practically no heating efficiency.

Ballu BSAG-07HN1_17Y

Inexpensive split system with good functionality from Ballu. The recommended price of the BSAG-07HN1_17Y model is 18,900 rubles, but from some sellers the device can be purchased cheaper due to discounts and promotions. The device can operate in cooling and heating modes, consuming no more than 650 W of energy in both cases.

Please note that the permissible minimum temperature to turn on the heating function is seven degrees below zero. In such conditions, the air conditioner will work without problems, and the anti-ice system will protect against unpleasant consequences.

Also in the popular split system you can activate the ventilation function, dehumidification and maintaining the set temperature. In case of malfunctions, the device can independently diagnose them. BSAG-07HN1_17Y can maintain a comfortable sleeping environment. The user just needs to turn on the night mode, and then the split system will handle it itself.

Pros:

self-cleaning function;
low power consumption;
excellent build quality;
decent functionality;
pleasant appearance;
reasoned price tag;
official warranty for 3 years.

AUX ASW-H07B4/FJ-R1

Most air conditioners are available in white. But it does not always match the interior of the room. If this is your case, then you should choose a budget split system from AUX. This device is available in silver and black body colors. The latter looks especially stylish and fresh compared to its analogues.

The power of the split system in cooling and heating modes is 2100 and 2200 W. The noise level, depending on the selected speed, can vary from 24 to 33 dB, which is almost unnoticeable in everyday conditions. The maximum air flow of a split system is 7 cubic meters per minute. There is also an air ionization function.

Advantages:

Wi-Fi control (optional);
low noise level;
two color options;
air purification function;
automatic self-diagnosis.

Flaws:

Wi-Fi module cost.

Electrolux EACS-07HG2/N3

We didn’t have to think long about which split system is best available in the budget category. The EACS-07HG2/N3 model, which is offered by the Electrolux company, can offer everything that you would expect to see in a device less than 20 thousand rubles. The power in cooling and heating modes in the reviewed air conditioner is 2200 and 2400 W. At the same time, the system consumes less than 700 W of energy per hour of operation.

Drying mode and night mode, automatic maintenance of the set temperature, self-diagnosis and ventilation are additional modes available in the EACS-07HG2/N3. If you have allergies or are sensitive to dust, then the Electrolux split system will be even more of a great purchase, since it has deodorizing and plasma filters installed. Other options worth noting are warm start and settings memory.

Advantages:

black/white color to choose from;
bacteria filtration;
elimination of odors;
high quality temperature control;
washable filter;
convenient timer;
self-diagnosis;
great design.

Dimensions

A reliable air conditioner should not be small, but moderately large, comparable to the area of the room and its power. Example: the internal part of a product with a parameter of 9,000 BTU (for 25 m²) should be from 790–800 mm in length and 270 mm in width.

The correct sizes are necessary for the following reasons:

power and quality require larger parts and greater wall thickness, especially for heat exchangers;
air outlet openings, louvres must be adequately large to effectively distribute flows in different directions and reduce noise.

A device that is too small will not be able to properly service and distribute coolness/heating; it is noisier. Usually, of two air conditioners of equal power, the larger unit is better, quieter and more efficient.

The best split systems price – quality

You need to spend money wisely, and only then will it be able to fully pay for itself. Of course, in the case of premium split systems, you will get maximum functionality and efficiency when performing them. However, buyers often forget that some features, even if they are used, will be used so rarely that they are not worth overpaying for. But saving too much when you can spend more is also not wise. How to be? We advise you to take a closer look at the second category of our TOP split systems, where we have also collected 4 of the best models, but not in the budget category, but in terms of cost and quality ratio.

Ballu BSD-09HN1

The variety of air conditioners on the market today is so impressive that even the most demanding buyer will not be disappointed by the range. But if you want to choose a high-quality split system priced up to 20,000 rubles, without wanting to sacrifice functionality or design, then the number of interesting models will not be so large. And among them, Ballu BSD-09HN1 deserves special attention.

The indoor unit of the split system operates quite quietly, especially if you set the night mode. But the external one is very noisy and can transmit vibrations to the wall, which, if its thickness is small, will cause discomfort in the room. You should initially take care of this by purchasing additional rubber pads for fastening points.

A split system can cool a room with a power of 2640 W, and also heat it with a productivity of 2780 W. If necessary, both functions can be disabled by selecting the ventilation mode. Of course, the Ballu air conditioner is equipped with a screen and can remember the latest settings. But if you want to get maximum capabilities, then as an option the manufacturer offers a Wi-Fi module for controlling the split system from anywhere.

Advantages:

work productivity;
quality of air filtration;
minimum noise level;
protection against mold formation;
ideal combination of cost and capabilities;
self-diagnosis and self-cleaning.

Flaws:

The external unit is too noisy.

Electrolux EACS-09HAT/N3_19Y

Next on the list of the best split systems is a solution from Electrolux. Experts usually classify Swedes as middle class, but this does not in the least prevent the EACS-09HAT from being more interesting than many competitors at a higher level. In addition, the cost of this model is a relatively modest 19,500 rubles.

The service area is 25 square meters, the length of communications is up to 20 meters, 3 speeds, a convenient remote control and a deodorizing filter - these are the main advantages of this device. The list of modes includes heating and cooling (average performance 2700 W), ventilation, and self-diagnosis that are already familiar to air conditioner owners.

The device is protected from dust according to the IPX4 standard. There is a timer for turning on and off, and you can adjust the temperature with an accuracy of 1 degree. The average noise level of the indoor unit is 27 dB, and the external one is 54 dB. The split system is well built, looks great and comes with an official 3 year warranty.

Advantages:

stylish Electrolux design;
built-in timer;
company warranty and service;
low noise and high efficiency;
permissible length of communication output;
sleep mode, self-cleaning, dehumidification and so on.

Hisense AS-09UR4SYDDB1G

If you need a functional split system for a large bedroom or a spacious living room, then AS-09UR4SYDDB1G from the popular brand Hisense is the best choice. The device can serve an area of up to 30 square meters and offers all the modes users need, including dehumidification and automatic temperature maintenance. At minimum and maximum load, the noise level of the device is moderate 24 and 38 decibels, respectively. In reviews, the air conditioner is also praised for the presence of a fine filter, which allergy sufferers will certainly appreciate. Moreover, the price of such an attractive device starts from only 20 thousand rubles.

Advantages:

serviced area;
convenient control;
low noise level;
excellent performance;
reasonable cost;
design and build quality.

Toshiba RAS-09U2KHS-EE / RAS-09U2AHS-EE

For a house or apartment, Toshiba split systems are the ideal choice. The new model of the Japanese manufacturer RAS-09U2KHS-EE will be able to effectively service premises with an area of up to 25 square meters. The device is capable of operating efficiently in heating mode down to a temperature of minus 7 degrees.

The Toshiba air conditioner boasts a proprietary Hi-Power function. Activating this option allows you to increase the power of the device to the maximum in order to quickly cool the room to the required temperature.

Like other modern split systems, there is a timer. This is convenient if you want to prepare your apartment or office for your arrival. For convenience, the RAS-09U2KHS-EE has an automatic mode available. In it, the user needs to set the temperature, and the system itself will determine what needs to be turned on - heating or cooling.

Advantages:

self-cleaning function;
efficiency;
well-developed management system;
reliability and practicality in operation;
high power 2800 W;
many operating modes;
length of communications;
Japanese quality.

Design

Each component of the split system has individual structural elements. The external unit contains:

A compressor is a device that compresses freon and maintains its movement through the refrigeration circuit. It can be spiral or piston. Spiral products are more reliable, but they are more expensive than their piston “brothers”.
4-way valve. This part is mounted in reversible air conditioners. The task of the device is to change the direction of movement of freon through the system, which leads to a change in the function of the blocks. The external unit works for heating, and the internal one for cooling.
The control board is an element characteristic of converter-type split systems. Other types of devices place the electronics on the indoor unit due to the risk of damage due to high humidity and temperature.
Condenser is a unit in which freon is cooled and condensed. The air that passes through the air conditioner warms up.
A fan is a device that provides air flow. Cheaper models have only one speed, which means the air conditioner can operate within a small temperature range. In more expensive devices, fans have 2-3 speeds, which significantly expands the functionality of the split system.
The freon unit filter is a device that is placed in front of the compressor inlet and protects it from foreign elements. If the installation was carried out in violation of the rules, no filter will help.
The quick-release cover is designed to cover the terminal block and fitting connections.

The indoor unit has a number of elements:

The front panel consists of a plastic grille through which air flows into the unit. The panel can be dismantled if it is necessary to maintain the split system (for example, to clean the filters).
Evaporator is a radiator designed to heat freon and evaporate it. Thanks to this device, the temperature of the passing air is reduced.
The coarse filter is a plastic mesh that filters out large dust and animal hair. For the system to function properly, cleaning must be done once every 14 days.
The indicator panel is a section of the indoor unit where a group of LEDs is mounted, reflecting the operating mode of the split system and signaling the presence of breakdowns.
Horizontal blinds are an element that adjusts the direction of air flow. The peculiarity of the devices is the presence of an electric drive, as well as the possibility of regulation from the remote control.
Fine filter. The purpose of this unit is to remove fine dust and odors from the air entering the room. The device comes in various types - carbon (eliminates unpleasant odors), electrostatic (retains dust) and others. Even without such a filter, the air conditioner will work normally.
A fan is a device for supplying air to a room, it has 3-4 speeds.
The condensate tray is located above the evaporator and is necessary to collect water that has formed on the outside of the evaporator. Next, the accumulated water is discharged through the drainage tube.
Vertical blinds are necessary to regulate the direction of air flow horizontally. Conventional air conditioners provide only manual adjustment, while more expensive devices provide control using a remote control.
The control board is usually located on the right of the indoor unit. An electronic unit with a central microprocessor is also located here.
Fittings are special connections that are located at the back, at the bottom of the block. Tubes are connected to them, connecting the blocks outside and inside the room.

READ ON THE TOPIC: How to prevent split system air conditioning.

The best inverter split systems for the home

In the final category, we will look at the most advanced type of split systems. The presence of an inverter in the air conditioner allows you to smoothly change the operating frequency after reaching the required temperature level. Thus, the device does not operate pulsed, but continuously. Implementation of this scheme in a split system is more expensive. But on the other hand, it reduces energy consumption (by an average of 50% compared to conventional solutions), and also increases the durability of the compressor (by about two times).

Electrolux EACS/I-09HM/N3_15Y

Opens the list of Electrolux inverter air conditioners from the Monaco series. The energy efficiency of the device in cooling mode corresponds to class A++, and in heating mode – A+++. Moreover, in each of them EACS/I-09HM/N3_15Y can operate at temperatures up to 15 degrees below zero! Only one device in the rating managed to bypass the Swedish-made split system in this indicator, but we will talk about it below.

A good split system for home is equipped with a deodorizing filter that cleans the air from tobacco smoke and other unpleasant odors. The device nominally uses 775 watts of energy per hour for both heating and cooling. At minimum performance the value drops to approximately 120 W. The length of communications in this model can reach 20 meters, and the device itself is designed for 25 square meters.

Advantages:

operating temperatures;
moderate energy consumption;
minimum noise level 23 dB;
convenient remote control and memory function;
high quality of assembly and materials;
auto-restart and self-cleaning.

Flaws:

there is no backlighting of the buttons on the remote control;
the price is a little high.

2. Mitsubishi Heavy Industries SRK20ZSPR-S / SRC20ZSPR-S

And let’s immediately consider a powerful split system with inverter control, which can operate in more severe conditions. More precisely, when cooling, the ambient temperature can also be minus 15 degrees, and for the heating mode a value of another 5 degrees lower is allowed.

Before purchasing the SRK20ZSPR-S, please note that the noise level of the indoor unit of this model can reach 45 dB. For home this is not very critical, but in an office such volume can interfere with comfortable work.

The wall-mounted split system from Mitsubishi Heavy Industries is capable of providing air flow up to 10.1 cubic meters per minute. The power in cooling and heating modes of this device is 2700 W and 2 kW, respectively. The energy consumption of the air conditioner can reach only 790 and 545 W.

Advantages:

operating temperature;
reliable and durable compressor;
three year warranty;
convenient remote control;
cools the room very quickly and efficiently;
price from 26 thousand.

Toshiba RAS-07BKVG-E / RAS-07BAVG-E

We owe the appearance of inverter split systems on the market to Toshiba. The company constantly strives to offer customers only the best, which is why interesting solutions like RAS-07BKVG-E are actively appearing on the market. This is a device from the Mirai line, and it first went on sale more than two years ago. However, even today, the capabilities and design of the reviewed model are not inferior to analogues in the price category up to 35 thousand.

The air conditioner is assembled at the manufacturer's own factory in Thailand and undergoes multi-stage quality control. The device has an elegant, streamlined shape and fits very well into any interior. A distinctive feature of the device, like the entire BKVG series, is the use of ozone-safe freon R32. Its efficiency is noticeably higher than that of the most common R410A.

What I liked:

5 fan speeds;
carbon-cahetin filter (optional);
reliability in operation;
great functionality;
maintenance of premises up to 20 square meters;
Low power consumption and high efficiency.

Panasonic CS/CU-BE25TKE

The review is completed by a reliable air conditioner with a classic Panasonic design. The assembly and reliability of the split system does not cause any complaints. The excellent quality is also indicated by the guarantee - 3 years for the air conditioner, as well as 5 years for the rotary compressor. A split system can operate for heating at temperatures down to minus 15 degrees, and also cool the room if it is at least 5 degrees above zero.

As part of the series under consideration, the Panasonic brand offers air conditioners with a power of 2 to 5 kW. If CS/CU-BE25TKE is not suitable for you, then you can choose another solution that is suitable for the size of your home or office.

One of the key advantages of a split system from a Japanese brand is its incredibly low noise level. At minimum load it is only 20 dB, and if you need maximum power, the value increases to a still comfortable 37 dB. The energy efficiency of the CS/CU-BE25TKE complies with the A+ standard. The device is controlled from the remote control, but an optional Wi-Fi module is available for it.

Peculiarities:

energy efficiency;
low noise level;
high quality filtration;
high work efficiency;
quality of self-diagnosis;
long warranty;
night mode and timer.

Recommendations from professionals

Since split systems are no longer new on the climate control device market, professional installers have compiled a list of recommendations before purchasing such a device.

Never buy the cheapest air conditioner. They lack adequate energy efficiency and often fail to function properly on hot summer days and very cold winter days.
If the choice is between better power or lower noise levels, give preference to the power of a split system.
If you have a sufficient budget, it is better to take inverter devices. They perform their functions much faster, while consuming a minimal amount of electricity.

Look at the quality of the compressor. The best parts are made in Japan. They are responsible for the length of service life, the quality of ventilation, the speed of cooling and heating.
You should pay attention to the weight, especially when purchasing little-known models. It is better for the split system to be quite heavy. This indicator will indicate higher quality parts that are made of normal metal or plastic. The exception is expensive brands. They may be small in size and weight, but still pack a very powerful compressor.

Expert opinion

Starostin Konstantin Adreevich

Air conditioner installation and maintenance specialist

Despite the quality of inverter models, it is recommended to install them in the rooms where you spend the most time - a bedroom, a nursery or a kitchen. If you buy an air conditioner for occasional use, you can get by with a simpler system.

Criteria for choosing a split system

To decide which split system to choose for your apartment or office, you need to understand a little about the features of this equipment:

Variety . In this review, we considered only wall-mounted models. But there are also ceiling and duct options, which are used mainly in offices, as well as floor solutions, which are not so functional and convenient, but do not require complex installation, which is optimal for rented apartments.
Filtration efficiency . In addition to the classic options that use coarse filters, manufacturers also produce air conditioners for allergy sufferers. Such solutions trap the smallest particles of dust and microorganisms. Some models offer the function of purifying the air from foreign impurities and odors.
Power . Directly depends on the area of the room. As a rule, websites selling climate control equipment contain calculators that allow you to accurately calculate the optimal performance of a split system. However, we recommend taking it a little with reserve, because this will have a positive effect on the service life.
Noise level . Optimal values are within the range of 25-32 dB. If the operating volume drops to 20 dB, then the device is suitable for working at night. But noisy solutions (about 40 dB or more) should be installed in appropriate areas, such as open space in call centers, shops or similar premises.
Compressor . Standard or inverter. The second is preferable because it saves energy and lasts longer while providing the same level of efficiency. However, you will have to “vote with your ruble” for such advantages, so choose for yourself.
Design . If the air conditioner has ideal characteristics, but does not fit into your apartment with its appearance, then you should not buy it. Although manufacturers usually paint devices white, there are other options available on the market.

Principle of operation

The operating principle of a split system can most easily be presented by explaining the processes occurring in the device. Freon is supplied to the compressor from the evaporator under a pressure of 3-5 atmospheres, having a temperature of 10-20 degrees Celsius.

Next, the device compresses the gas to 15-20 atmospheres, due to which the freon is heated to 80-90 degrees and then supplied to the condenser. Next, the condenser is blown with an air flow whose temperature is lower than the freon temperature.

As a result, the gas turns into liquid form and additional heat is released. Liquid is already coming out of the condenser, and the freon temperature is 15-20 degrees higher than the air temperature. Warm freon is supplied to a temperature control valve made in the form of a capillary (a copper tube of small cross-section, having a spiral shape).

Thanks to this design, the freon pressure drops to 4-5 atmospheres, its temperature decreases, and part of the gas evaporates. Next, the freon mixture in the form of gas and liquid is sent to the evaporator and blown with air from the room.

As a result, the gas turns into a gaseous state, takes away heat and cools the air in this way. After this, the freon is sent to the compressor inlet, and the cycle is repeated again.

The considered principle of operation is typical for any air conditioner, regardless of its type and manufacturer. The main problem in the operation of an air conditioner is the inability of freon to transform into a gaseous state in a timely manner. The result is a supply of liquid to the compressor inlet, which causes a powerful hydraulic shock. The result is compressor failure. There can be many reasons for the malfunction, ranging from filter contamination to malfunction of the air conditioner.

Which split system is better to buy?

If you have enough money, then it is better to buy inverter models. In the future, they will recoup their price, and during operation they will delight you with greater efficiency. As for specific companies, from the point of view of design and price-quality ratio, Electrolux products would be an excellent option. In terms of reliability, Toshiba easily surpasses its main competitors, and the Mitsubishi concern does not lag behind it. We also liked Ballu, and the model from Hisense showed that Chinese brands can also claim leadership.

Assembly, materials

Based on the quality of assembly and plastic, if the user chooses a product via the Internet, then he should read user reviews.

If the split is selected directly in the store, then it becomes possible to inspect:

ask the seller to open the lid - it should not be noticeably thin or flimsy;
high-quality plastic with thick walls, bright white, without yellowness;
ask to remove the mesh filter and inspect the heat exchanger - the petals should be free of jams and not too thin. Low-quality models have plates so thin that they crumple at the slightest touch.

Markings from manufacturers

When purchasing a split system, you can immediately find out about its main parameters without taking out your passport. Basically, the brand markings are the same, but Chinese manufacturers may change it.

The box or block depicts a special code of letters and numbers, each of them indicates a specific characteristic, namely:

refrigerant type;
electric drive power;
the lineup;
type of power supply.

As a standard, the first letters indicate the brand name and block type.

Standard sizes

Wall-mounted. Traditional size. One block is in the room (usually under the ceiling near the window), the other is a little lower on the outside of the building wall. This is a universal design, the product can be installed in apartments, houses, offices, and small shops. The only negative is that the power is usually up to 10 kW, which is enough for an area of up to 100 m².
Duct. For installation under suspended ceilings. System with air channels around the perimeter of the premises. For large rooms, offices or for an entire apartment, country house. The power of the equipment is high - 5–25 kW.
Cassette. The indoor unit is in the form of a square cassette with air outlets on the sides. Convenient to install behind a suspended ceiling. The side channels are bent at 30–35 degrees, with blinds, so the prepared air does not exit vertically downwards, but to the sides.
Column, floor-ceiling. They differ in overall dimensions, are focused on high productivity, and can replace duct and cassette systems in the absence of suspended ceilings.
Window monoblocks. Two blocks in one housing. A window or wall divides such a box into two parts - one is exposed outside (to the street), the second remains indoors. A practical solution, but there is a drawback: this type of installation reduces the thermal insulation of the room.
Read also: Changeover switch for a generator - detailed instructions on how to choose and connect to the network at home with your own hands
Mobile, with remote blocks. The standard size allows you to move the equipment: all you need to do is move one of the blocks or the air duct outside. Pros: portable, no need for labor-intensive installation. Disadvantages: low power, noise, high price.

It is possible to combine different units, for example, one, paired or several external boxes serve internal air conditioners, including those of different sizes.

Standard formulas for calculating suitable power

To calculate the total power of a fusion system, the indicators of the main factors are added up:

An indicator of heat gain, depending on the area of the room, ceiling height and number of windows. To do this, calculate: area*ceiling height*illuminance factor/1000. The illumination factor is selected as follows: 30 for darkened rooms, 35 for moderately lit rooms, 40 for strongly lit rooms.
An indicator of heat release from human bodies. 0.1 kW for each person, if there is no need to engage in physical activity in this room.
Heat inflows from household appliances. The average figure is calculated at 30% of the power consumed by the device. For example, a computer with a power of 0.9 kW allocates 0.3 kW, etc.

After adding up all the indicators, the average power required by the air conditioner in a particular room is obtained.

Other climate control alternatives

Multi split systems are several indoor units that are connected to one outdoor unit. There are usually

used in houses with a non-standard layout, where the owners do not want to place several external units throughout the house. The indoor units operate independently of each other (the temperature in different rooms can be set differently). The price of multi-systems is an order of magnitude more expensive than conventional air conditioners. Their installation is also very expensive. Therefore, it is much more convenient to install separate splits in each room.

A floor-mounted home air conditioner is usually purchased for temporary use. It is easy to move from room to room, or take it with you to the country house. These models are especially popular among owners of rental housing. Modern floor-mounted air conditioners have customizable or automatic modes to set the desired temperature, but in comparison with wall-mounted “splits” they are in many ways inferior to the latter.
Window devices were once very popular, but are now outdated. They can still be found on sale, but they are not in demand.

Other types of air conditioners are practically not used in homes.

Air conditioners are sold in specialized companies, in the household appliance departments of hypermarkets and in online stores. The first option remains the most correct for purchase, as it allows you to get a competent selection and high-quality installation. You can ask questions to the managers and, based on this, decide which air conditioner to buy for your home.