Is it possible to hang a Heater on a Wooden Wall 6 ballu becem-1500

Here you will learn:

• Installation of electric convectors
• General requirements
• Installation process
• Installation of gas convectors
• General requirements
• Installation process

Convectors are becoming increasingly popular heating equipment. They are extremely compact and highly efficient, quickly heating rooms without the help of electric boilers and batteries. Heaters are mounted under windows and on blank walls, where they successively pass almost all the air in the rooms through themselves, heating it. Let's see how to install a convector on a wall. Moreover, we will touch upon not only electric, but also gas appliances.

Can underfloor heating be mounted on a wall?

You can install a heated floor on any plane, including on a wall or ceiling, but to do this, the structure must be securely fastened and a channel for the power cable must be laid. At the same time, the heat transfer efficiency does not decrease depending on its location.

This placement option is suitable if it is not possible to install heating radiators, and installation of a heating electric or water floor is not possible. An example of such a room is a flight of stairs.

In addition, heating installed in this way will cut off cold air, which is especially important if the wall is outdoor. But it is worth noting that some of the heat will still be wasted, heating the street. Therefore, it is necessary to make a good thermal insulation layer to reduce heat loss.

Expert opinion

It-Technology, Electrical power and electronics specialist

Ask questions to the “Specialist for modernization of energy generation systems”

Heater TeplEko Quartz - “How to install? Is it economical? Is it safe for children and animals? Minimum working equipment. What do you need to buy in addition, and what can you do without? Advantages and disadvantages. Will a woman be able to install it? » | reviews Here we leave the choice of convector control up to you, since in the future, you can always buy an additional socket with a thermostat and expand the capabilities of your inexpensive device. Ask, I'm in touch!

Is it possible to leave the heater on overnight?

What is important to remember: do not allow children to play with it - they may get burned or break the device. You can't leave the heater on

turned on at
night
, and even more so when leaving home (even for a short time, even to a nearby store for five minutes): working equipment also requires vigilance.

Interesting materials:

How are grapes treated before covering for the winter? How to process radishes? How to treat a fur coat? How to treat apple and pear trees? How to process cabbage in August? How to treat gladiolus tubers? How to treat strawberries against pests in the spring? How to treat strawberries after wintering? How to treat orchid roots when transplanting? How to treat purchased strawberry seedlings before planting?

Advantages of this type of heating

Insulating walls with “warm electric floors,” like any heating, has its pros and cons.

1. It is not possible to place furniture near heating walls. It will prevent the spread of heat, in addition, hot air will have a negative effect on the products, which will ultimately shorten the service life.
2. You cannot hang a picture or TV on such a surface, as this could damage the heating elements.
3. Large heat losses occur. After all, the wall is heated, on the other side of which there is a street, resulting in unnecessary consumption of thermal energy.
4. Shifting the dew point deeper into the wall. In winter, condensation will accumulate, which will lead to freezing, and this will accelerate the process of destruction of the walls.
5. Increased electricity consumption.
6. Destruction of the finishing - the service life of wall coverings will be significantly less than on walls without heating.

As you can see, there are many disadvantages, although one cannot help but mention the positive aspects of such heating:

• located vertically, so dust will not spread throughout the room;
• will free up space in the room that is occupied by standard radiators;
• cost-effectiveness in terms of installation - installation is inexpensive compared to installing another heating device;
• creates an excellent thermal effect;
• fights fungus and mold;
• does not dry out the air, since there are no open elements that burn oxygen;
• heating of the room occurs more evenly;
• does not spoil the interior of the room.

Since, with electric wall heating, the heating method is radiant, you can save money by setting the temperature level in the room 2 degrees lower, which will not affect the level of comfort.

Another important point is that if a wall separates two rooms in an apartment, then if there is heating on it, both rooms will be heated.

What kind of lighting do you prefer?

Built-in Chandelier

Convector Noirot Spot E-5 1500

​Photo: https://beru.ru/

Noirot Spot E-5 1500 is equipped with an electronic control system, which greatly simplifies setup and operation by the user. A digital thermostat allows you to adjust the heating temperature. On average, Noirot Spot E-5 1500 will serve a room of up to 15 m2. By setting the exact temperature, you can save energy consumption. There is a standby mode with consumption of only 500 W.

Convector Noirot Spot E-5 1500

Advantages:

• fast heating
• convenient setup system
• accuracy of the set temperature up to 1 degree
• silent operation
• durability
• standby mode to save energy

Flaws:

• high price
• smell from the heating system when first turned on

Advantages, disadvantages

1. Easy to install and operate. It comes down to three steps: remove the packaging, hang it on the wall, plug it into the socket. The controls are intuitive.
2. Reliability, long service life - up to 15-20 years. Virtually no moving parts, proven designs.
3. Safety - maximum heating temperature of the thermoelement is 80 degrees. Fire and serious burns are not possible. Location on the wall or ceiling reduces the risk to a minimum.
4. Environmentally friendly - does not burn oxygen.
5. Efficiency - up to 97%.
6. You can fit the convector into any interior by placing it on the wall, ceiling, or floor.

The disadvantage is the cost of electricity needed to operate. But, due to rising prices for other energy sources, the disadvantage is less noticeable in comparison with the advantages.

Expert opinion

It-Technology, Electrical power and electronics specialist

Ask questions to the “Specialist for modernization of energy generation systems”

Warm the house and not start a fire: use and installation of electric convectors. – online store Many devices have the ability to connect a thermostat, which allows the user to more finely control the temperature in the room. Ask, I'm in touch!

General requirements

In some cases, the best way out of the situation will be to install a gas convector. This heating device is mounted on the wall and is powered by a gas cylinder. The possibility of power supply from the main line is also provided. If gas appears in your locality in the near future, purchase gas convectors. The following requirements apply to their installation:

• Mandatory maintenance of distances to the nearest objects and walls in accordance with the installation instructions;
• The gas pipe is supplied along the street;
• When installing in a household with wooden walls, it is necessary to consider thermal insulation;
• The convector should not be installed at a great distance from the floor, as this will reduce the efficiency and intensity of the convection process.

Let's see how to install such a convector on a wall.

Choice

You need to be guided by value, purpose. Can be used as backup, main heating, thermal curtain generator in front of panoramic windows, glass walls (for example, on verandas, winter gardens, greenhouses).

The second sign is the power of the device. For 10 sq. meters of area should account for 1.2-1.5 kW of power.

It is enough to purchase 2-3 devices and place them evenly throughout the room along the external walls, under the windows. It costs less than buying one powerful device, will reduce the load on the electrical network, and will create a safety margin for the heating method. If one breaks, the room will be heated by the remaining ones.

The third important factor is additional functions. They make the device comfortable and multifunctional. The mandatory number of additions includes protection against overheating, tipping over, and short circuit. Useful: air humidifier, ionizer, forced circulation, remote control.

Convector Thermor Evidence 3 Elec 1000

Photo: https://beru.ru

The wall heater features a special front panel made of metal 20% thicker than its analogues. This ensures increased efficiency of convectors and high air heating speed. The electric heater is equipped with a built-in air ionizer, which cleans it of bacteria. And Soft Air technology maintains a comfortable microclimate. The convector also has an electronic thermostat. Thermor Evidence 3 Elec 1000 has a waterproof case, a fall and overheat sensor.

Convector Thermor Evidence 3 Elec 1000

Advantages:

• thickened front panel
• built-in ionizer
• electronic thermostat
• moisture protection
• economical electricity consumption
• Soft Air technology

Flaws:

• high price
• no legs included

Attention! This rating is subjective in nature, is not an advertisement and does not serve as a purchase guide. Before purchasing, consultation with a specialist is required. This concludes our review. We hope that we have helped answer the question of which convector to choose for heating a wooden house. Good choice!

#2020 #Top 10

Read us first - add the site to your favorite sources.

Add a comment

{"commentics_url":"\/\/express-novosti.ru\/comments\/","page_id":1352121,"enabled_country":false,"enabled_state":false,"state_id":0,"enabled_upload": false,"maximum_upload_amount":3,"maximum_upload_size":5,"maximum_upload_total":5,"securimage":true,"securimage_url":"\/\/express-novosti.ru\/comments\/3rdparty\/securimage\ /securimage_show.php?namespace=cmtx_1352121″,”lang_error_file_num”:”\u041c\u0430\u043a\u0441\u0438\u043c\u0443\u043c %d \u0444\u0430\u0439\u043b\u043e\ u0432\u043c\u043e\ u0436\u0435\u0442 \u0431\u044b\u0442\u044c \u0437\u0430\u0433\u0440\u0443\u0436\u0435\u043d\u043e.","lang_error_file_size":"\u041f\u043e \u0436\u0430\u043b\ u0443\u0439\u0441\u0442\u0430, \u0437\u0430\u0433\u0440\u0443\u0437\u0438\u0442\u0435 \u0444\u0430\u0439\u043b \u0440\u0430\ u0437\u043c\u0435\u0440\u043e \u043c \u043d\u0435 \u0431\u043e\u043b\u0435\u0435 %d MB.","lang_error_file_total":"\u041e\u0431\u0449\u0438\u0439 \u0440\u0430\u0437\u043 c\u0435\u0440\ u0432\u0441\u0435\u0445 \u0444\u0430\u0439\u043b\u043e\u0432 \u0434\u043e\u043b\u0436\u0435\u043d \u0431\u044b\u0442\u044c \ u043d\u0435\u0431\u043e\u043b\ u0435\u0435 %d MB.","lang_error_file_type":"\u041c\u043e\u0436\u043d\u043e \u0437\u0430\u0433\u0440\u0443\u0436\u0430\u0442\u044c \u0442\u0 43e\u043b\u044c ""lang_text_loading":" u0437\u043a\u0430 ..","lang_placeholder_state":"\u0420\u0435\u0433\u0438\u043e\u043d","lang_text_country_first":"\u0421\u043d\u0430\u0447\u0430\u043b\u0430 \u0432\u044b\u04 31\u0435 \u0440\u0438\u0442\u0435 \u0441\u0442\u0440\u0430\u043d\u0443″,”lang_button_submit”:”\u0414\u043e\u0431\u0430\u0432\u0438\u0442\u04 4c","lang_button_preview":" \u041f\u0440\u0435\u0434\u0432\u0430\u0440\u0438\u0442\u0435\u043b\u044c\u043d\u044b\u0439 \u043f\u0440\u043e\u0441\u043c\u 043e\u0442\u0440″,”lang_button_remove ":"\u0423\u0434\u0430\u043b\u0438\u0442\u044c","lang_button_processing":"\u041f\u043e\u0434\u043e\u0436\u0434\u0438\u0442\u0435..."}

Convector installation

If the convector must be located on the wall, it is better to entrust the installation to specialists. They will correctly install brackets and equipment on a vertical surface.

By and large, convectors do not require special attention to themselves. The main thing is to wipe them from dust. In this case, the equipment must be turned off from the network and allowed to cool. The heater can be wiped with a dry or slightly damp cloth. Please note: under no circumstances should you use furniture polish.

Electric convector grilles can be cleaned with a vacuum cleaner, but do this no more than once or twice a year.

When removing the convector before the onset of hot summer, make sure that it will be stored in a room with as low humidity as possible. Also, do not leave the device exposed to sunlight and protect it from sudden temperature changes. Optimal storage conditions are temperature 12-27° and relative humidity 40-60%.

Expert opinion

It-Technology, Electrical power and electronics specialist

Ask questions to the “Specialist for modernization of energy generation systems”

Installation instructions for Teplokeramik ceramic heaters. Articles After a lot of thought, studying a bunch of information, buying another heater, they seem to be inexpensive, but when you buy one every year, it turns out fine, we finally decided on TEPLEKO. Ask, I'm in touch!

Which company is better to buy a convector?

Rating of the best convectors of 2022

How to connect a thermostat?

First you need to decide what type of thermostat you want to install. At the moment, according to the installation method, they are divided into 2 types:

The wall adjuster is a little more difficult to install, but can be installed wherever you find convenient. It is enough to attach it to the wall with self-tapping screws or install it in a trim box (mounting box) and connect it to the panels. If you plan to install several panels in a room, then they are connected to each other in parallel:

That's all! There is nothing complicated about it. But still, if you have questions about installing ceramic infrared heaters, call us, we will be happy to advise you. If you do not want to install the panels yourself, then our company will do it for you, but only within Kyiv and the region.

Conclusion

Convectors belong to the category of simple, promising heating devices. For those who want to purchase and install it correctly in a house, apartment, or office, a few tips from experts will be useful:

Expert opinion

It-Technology, Electrical power and electronics specialist

Ask questions to the “Specialist for modernization of energy generation systems”

What are the features of installing a ceramic panel? Installation involves removing it from the packaging, assembling the mounting bracket, marking holes in the wall for screws, checking the parallelism of the floor with a building level, screwing the bracket, and installing the device. Ask, I'm in touch!

Construction of a water domestic convector

Another factor that should be considered when choosing this equipment is the material from which the convector is made.

Thus, the main materials from which sections of water radiators are made are the following:

• alloy of copper and aluminum;
• bimetal panels;
• aluminum;
• steel elements.

Copper-aluminum models are the most expensive. The connection diagram for heating convectors made of this material involves the installation of copper connecting parts, which have a very high price.

The use of such devices will be relevant if there is a need to make the design of the heating system lighter. Most often, consumers prefer samples made of aluminum or bimetal, but their installation requires the purchase of special fasteners and kits of installation systems.

It will be much more profitable to install batteries made of steel.

These devices can be connected in one of two ways:

• by means of side fastening;
• using lower fixation to the system.

To install a water-type convector, you first need to fix the radiator on the wall, for which special holes are drilled in it and special hooks are fixed, which act as brackets. You can connect the water mechanism to the general heating system using pipes made of plastic or steel (read also: “What are the types of water heating convectors - types, advantages”). It is best to entrust such work to professional craftsmen, since incorrectly installed equipment can cause serious problems in the entire heating system. In addition, specialists can provide photos of convector options and help you correctly calculate the power of a heating convector for a specific room.

Operating principle of IR heater

Classic heating devices heat by heating air masses - they rise upward, displacing colder air downwards. As they approach wall or floor heaters, they heat up and rise again. This creates a continuous cycle that gradually warms up the rooms and spaces. Electric heaters (the same convectors) heat in a similar way, spending a huge amount of energy on this.

IR heaters do not emit heat themselves, they generate infrared radiation that heats objects around them.

Infrared wall-mounted heaters that appeared on sale have led to some revolution in the world of electric heating. They are more efficient and warm up faster , unlike other units. According to their principle of action, they are somewhat reminiscent of an ordinary sun. Yes, our daylight does not warm the air, but the surface of the planet, and from there the heat is transferred to the air masses.

Infrared heaters, whether floor, wall or ceiling, work the same way. They are sources of infrared radiation, which reaches floors, ceilings and indoor objects, causing them to heat up. The speed of spread is instantaneous. That is, while convectors are chugging, trying to warm up the room, infrared heaters are already warming up interior items with might and main, generating heat.

Recommendations for installing a ceiling device and basic mistakes

To mount and hang the heater from the ceiling, it is advisable to use the fittings that come with the device.

To prevent cable routing from being noticeable, a U-shaped profile is used along the wall and ceiling.

Thermostat

When installing, owners often make the same mistake, forgetting that when installing several devices at once in one room, it is necessary to take into account the total power. This applies to units that are connected to one thermostat.

Failure to comply with this rule will result in device failure and electrical failures.

How to connect to the network securely

To ensure safety, you can ensure that the device is grounded. To do this, the yellow-green cable is connected to the appropriate terminal.

Types of wall-mounted IR heaters

From a wide selection of wall-mounted infrared heaters, you can easily choose a model for your interior.

IR wall heaters are available in several modifications:

• Ceramic - are thin wall panels of various colors. Ideal for rooms where you need to create an extremely neat heating system without spoiling the interior ;
• Micathermic - approximately the same as ceramics, only here modified heating elements are used;
• Steel - they use a metal radiant panel. In appearance they look like fluorescent lamps. The main advantage is the minimum thickness;
• Film - made in the form of unfolding pictures. They look great, the only thing that bothers me is the visible wire. Good for temporary heating;
• Halogen - built on the basis of halogen heating elements. Not very suitable for heating rooms, but it is an ideal wall-mounted option for a terrace or veranda.

Rules for installing an IR wall heater

In order to mount a wall-mounted infrared heater, you need to select suitable brackets. They must support the weight of the equipment and not bend under its weight. It is best to use the fasteners that come as standard. We connect the heaters to working sockets that have good electrical wiring. If the power of the device exceeds 3 kW, we run a separate wire of a suitable cross-section from the meter and supplement it with an RCD .

When installing IR heaters, you need to understand that they generate radiation that can cause headaches as a result of simple overheating of tissues due to too intense heating. Therefore, equipment should be located away from constant crowds of people and places to sleep (away from sofas and beds).

Which heater to choose for a wooden house?

Heat a wooden house

The easiest way is to use directional devices operating from the mains.
... To create a comfortable temperature in wooden houses, the following types of safe heaters are considered the most popular:

• oil radiators;
• fan heaters;
• convectors;
• infrared emitters.

Interesting materials:

What is an agent's commission? What is a TED-style conference? What is concrete and abstract? What are concrete and abstract nouns? What is a conservative portfolio? What is cargo consolidation? What is consolidation in the market? What is consolidation in logistics? What is consolidation of power? What is a constant in Pascal?

Detailed instructions for installing and connecting an infrared heater to the ceiling and walls

Infrared heaters are gaining increasing popularity due to their efficiency, safety and high performance. You can enjoy all of the above benefits only by installing this device correctly.

Preparatory stage

Infrared heaters can be used as the main source of heat in a room. In this case, you cannot do without a careful calculation of heat losses. They depend on many factors, such as room size, materials, wall thickness, ventilation and region, since each region has a minimum permissible temperature.

List of required tools

At the preparatory stage, it is necessary to decide on the place where the heater will be mounted and prepare the following tools:

This is the required minimum of tools, without which it will not be possible to install the heater. In addition to them, you can use a pyrometer for calculations when installing several devices at once.

Where and how to install an IR heater?

The location of the infrared heater depends on its type and heating plan. It can be installed on the ceiling, on the wall, with or without a slope.

Safety precautions

Remember that installing IR heaters involves working with electricity. Therefore, it is important to maintain maximum caution and follow safety rules:

To use the heater more efficiently in your home, place it near materials that have high heat absorption rates, such as wood, carpets, and stone walls. U

The mounting surface must be strong enough, as some heaters can weigh up to 28 kg, although many, of course, are lighter.

Location and height from the floor

One of the important requirements for installing an IR heater is the distance to a person’s head, especially in work areas, where a person spends a lot of time practically motionless. This distance should be at least 1.5 - 2 meters. In fact, it is determined by the power of a particular heater. If its power is up to 800 W, then it can be placed at a distance of 70 cm from the human body. If the power is 1-1.5 kW, then the permissible distance starts from 1 meter.

The specifics of different rooms determine the features of installing the heater and the optimal layout of the devices.

Where to place the heater:

When heating open areas, it makes sense to install several devices at once, so that infrared radiation reaches most of the surface of the body.

IR heaters can provide different temperature conditions in certain areas of the room. To do this, several devices with different power levels are installed in one room.

Infrared heater installation instructions

Each heater comes with step-by-step instructions for its installation and operation. Study it carefully, as they are all different, there may be discrepancies in the recommendations for different devices.

Installation of the device

Attaching the heater to the wall is carried out in a very simple way. You will only need basic skills in working with common construction tools, such as a drill, hammer drill and screwdriver. Keep in mind that the design of different heaters may differ; do not ignore the recommendations from the manufacturers.

Electrical connection

Any infrared heater is mounted with a thermostat, a device that maintains a constant temperature. Any single-phase network is suitable for connecting them.

In normal apartment conditions you won’t have to worry about this.

The thermostat constantly monitors the room temperature to ensure and maintain the user-specified temperature. It automatically turns off the heater if the room temperature begins to exceed a preset level. The electricity supply to the heater will be restored as soon as the air in the room begins to cool.

Of course, you can abandon them altogether, but in this case the heaters will consume much more electricity and the room will not be as comfortable.

Connection diagram for several heaters via a thermostat

The connection diagram for IR heaters should not be intimidating - a simple adjustment of the cable of one or several devices to the thermostat, and then to any junction box.

The best option is to create a separate circuit breaker in the distribution board specifically for heaters. This will protect the network from overloads.

Where to go and how much does the work of the masters cost?

You don't have to do everything yourself. If you do not have enough experience in installation work with electrical equipment, contact one of the companies offering their services. The cost of installers' work averages from 1,500 rubles for 1 heater. Many of them guarantee their work, so there are no other good reasons to refuse these services other than the desire to save money.

Installing infrared heaters should not be intimidating - this is not a reason to abandon one of the most economical methods of heating an apartment or house today. With the help of specialized companies that are ready to help install heaters, difficulties should not arise.

Source

Heating convector installation process

The rear panel of the unit is equipped with a special mounting frame, which must be removed and screwed to the wall surface using four screws used as fasteners. Do not forget that the minimum distance from the front of the device to the nearest object should be at least 5 cm.

It is equally important to note that any calculations must be carried out taking into account the distance from the body of the device, and not its fixation frame. This frame is based on several special holes designed for installing plastic brackets, which can greatly facilitate the removal of dust from the back of the convector body.

The main differences between a traditional radiator and a convector

A standard heater is a device that includes a heating element, a thermostat that regulates the temperature, and sometimes also a fan. The main function of such a device is to heat the air in the room, but the heat cannot be distributed evenly. This inexpensive and convenient option for a heating device will be a good element for heating a small room.

To understand how a convector works, it should be noted that this equipment can be either floor-mounted or wall-mounted, and the operating principle of a heating convector is natural air convection, which is due to the name of this device.

Often such systems are equipped with special clamps, with the help of which heating convectors can be installed on the floor. The shape of convectors is usually rectangular. Answering the question of how a convector is designed, it should be noted that one of the key elements of its design is the heating part, through which air passes and, when heated, exits through the upper part of the device.

When comparing an oil radiator and a household convector, it is important to note that the heat from the radiator comes out in the form of radiation, and a warm air flow is formed inside the convector, which allows you to quickly and, most importantly, effectively warm up the entire room.