Application and purpose of TsE6803v
The device, manufactured by the Russian company Energomera, measures the active part of the consumed current connected to the load of the serviced electrical network. Energomer TsE6803v meters keep track of electricity consumption at only one tariff. This excludes their use when supplying electricity at different prices during the day and at night.
Important! In the register of measuring devices, the electric meter is listed as a device for metering and monitoring electric current consumption. In the “Measuring Instruments” category, the meter is listed under number 12673-06.
Stop
Sellers of magnets encourage people to buy their products in order to regulate the operation of measuring instruments. They promise savings and material prosperity. In practice, exposure to an electromagnetic field on the meter will bring nothing but problems.
mbed/w6Fz446dQy4″ width=”560″ height=”315″ frameborder=”0″ allowfullscreen=”allowfullscreen”>
The energy meter can operate in two indication modes: with the lid open and closed. When the integrity of the device is intact and the lid is closed, the accumulated energy is displayed on the liquid crystal display. When exposed to magnets, the lower segments of the underline begin to blink. To reset the indication, you must open and close the terminal block cover.
The operating mode with the lid open is different. After opening it, the following parameters are visible on the display:
- accumulated energy;
- number of lid openings;
- time of exposure to the magnetic field on the device;
- number of impacts.
The magnet on the Energomer TsE6803V meter not only has no effect, but also causes its breakdown. Therefore, before trying dubious ways to save money, weigh the pros and cons.
Explanation of markings
The electric meter is out of order
On the front panel of the meter you can see in accordance with what standards the CE device is produced. These are GOST R 52320-2005 and GOST R 52322-2005. The marking contains information about the technical operating conditions. To understand the encoding, you need to decipher a number of characters. For example, on the front panel and in the meter passport the following marking is indicated : TsE6803v/1 1T 220v 1-7.5A 3ph.4pr. M6 Ш33:
- fractional expression /1 – first class of accuracy;
- 1T – the meter calculates only one tariff;
- 220v – 4-wire connection with household voltage;
- 3ph.4pr – connection diagram (four wires for 3-phase current);
- M6 – type of counting device, electromechanical mechanism with a six-digit interface;
- Ш33 – method of mounting the device body, in this case means installation in a cabinet, Р31 means mounting on a DIN rail.
Decoding table for the TsE 6803v brand
Description
Electric meter TsE6803V
The TsE6803V electricity meter can only be used under certain operating conditions:
- The device is installed in a place where the temperature cannot cross the border of forty degrees below zero and sixty degrees above zero; only in this temperature range can one count on correct operation and long-lasting service of the meter.
- Air humidity should not be higher than ninety-eight percent.
- The device can be installed in a place where there is no negative environmental influence.
The appearance of the meter TsE6803V 1 10 100a is ergonomic and simple. On the outside there is a board with large numbers showing the amount of resource consumed. The GOST to which the device corresponds is also indicated. Each meter is marked with technical characteristics and requirements for use: type of housing, type of reading device, connection diagram, accuracy class, information regarding rated voltage and current.
The three-phase electricity meter TsE6803V R32 and other models do not have any fundamental differences from similar measuring instruments. There are some minor design and technical differences.
The TsE6803V 1 5 60a meter and some other models have an output test device.
These are the output terminals. They serve to connect to the system and test the electrical device. All models with an LCD screen have non-volatile memory, which makes it possible to save important data in the event of a power outage.
Read
Electricity meters Matrix NP73I
The electricity meter m7 p32 TsE6803V is sealed with the stamp of the energy supply organization. Before installing the device, it is important to check for mechanical damage and seals. The TsE6803V 1 meter is highly reliable; mainly, questions do not arise regarding its configuration.
Design features
How to seal an electricity meter
The principle of operation of the TsE 6803 is no different from similar devices. The electric meter has its own design features.
In the control unit, the voltage and incoming current data are sublimated into pulses. The pulse frequency is directly proportional to the power of the incoming energy flow. Data processing is performed by a microprocessor. It is he who is responsible for accurate metering of consumed electricity by the Energomer TsE6803v meter.
Electric meter interface TsE6803v
The electric meter has built-in terminals through which the tester is turned on to check the technical condition of the device. The meter has a non-volatile memory block. In the event of an emergency power outage, the last readings, date, time and tariff are recorded on the display.
There are two LED indicators on the front panel, one of which “Network” begins to glow, confirming the connection to the network. When a load appears, it begins to blink, then the metering device begins to work.
Note! If the “Network” LED does not light up, then you need to check the condition of the terminal connections. Otherwise, the device will need repair.
The second indicator “600 imp/(kW-h)”, by its glow, signals the consumption of the rated power of electric current.
Housing dimensions TsE6803v
Advantages of electricity meters
When considering the advantages of the product range from Energomer, it is noted that these devices are considered the highest quality of all samples on the market. The advantages include:
- High functionality of the product, capable of operating in several modes and storing the necessary information in memory.
- Convenience of taking readings, which, if desired, are transmitted to the dispatch console automatically.
- Long warranty period (up to 30 years).
Thanks to the reliability of the accounting device, the likelihood of its accidental breakdown is minimized.
Specifications
When purchasing an electric meter, be sure to familiarize yourself with the technical characteristics of the TsE6803v. They are indicated in the device passport. For example, for the TsE6803v P32 meter, the technical parameters must correspond to the following data:
- accuracy class – 1;
- number of tariffs – 1;
- input current frequency – 50 Hz;
- rated current – 5 A;
- permissible network voltage – 3x(230 – 400) V;
- maximum current – 60 a;
- sensitivity of the accounting mechanism – from 20 to 40 mA;
- operating temperature range – from + 400С to – 700С;
- protection class against external penetration of moisture and dust – IP51;
- Dimensions of the device – 141 x 170 x 52.
Life time
The manufacturer in the accompanying documentation indicates the maximum service life of the Energomer TsE6803v meter - 30 years. This period can be maintained subject to unconditional compliance with safety regulations, the absence of emergency overloads and the correct installation of the device.
Important! provides a guarantee of trouble-free operation of the meter for 4 years of operation, starting from the date and year of manufacture.
Calibration interval
After a certain amount of time the electric meter has been in use, the electricity supplier service must carry out verification of the device. The calibration interval for TsE6803v is indicated by the manufacturer in its passport. If a document is lost, it is customary to consider the verification interval for TsE6803v issued in the period from August 15, 1997. to 01.12.2000, – 8 years. For devices manufactured later, the verification interval is 16 years.
Meter cost
The price of TsE6803v electric meters of certain models is not very different in all regions of Russia. Below is a table of the average cost of three-phase single-tariff devices.
Table of average prices for meters from Energomera*
| Electric meter brand TsE6803v | Rated current | Average price, rub. |
| 1T M7 P31 | 60 A | 1500 |
| 1T M7 P32 | 60 A | 1500 |
| — « — | 7.5 A | 1800 |
| 1T M7 P31 | 100 A | 1800 |
| !t M7 P32 | 100 A | 1750 |
| 1T M7 P31 | 7.5 A | 1950 |
| Without brand | 5 A | 1600 |
*prices are as of July 2022.
Main technical parameters of the counter TsE6803VM
The check must be carried out after a certain period of time. TsE6803VM calibration interval can be found in the product data sheet. If the passport is lost, meters up to the year 2000 are checked once every 8 years, newer models once every 16 years.
Connection diagram
Counter TsE6803VM technical characteristics:
| Accuracy type | 1 |
| Rated voltage of devices | 220 |
| Highest current | 5(50); 10(100) |
| Total usable power of parallel circuit | 8 (0,8) |
| Temperature | from −40 to 70 |
| Dimensions | 143×175×52 |
| Weight | 1.2 kg |
A list of all parameters must be found in the product passport. This document is very important and must be preserved in order to carry out the verification on time.
Basic connection diagrams
TsE6308 meters are connected according to three circuits. One option is to connect the device directly.
Connecting TsE6308 directly
Two other connection schemes for TsE6803v use additional electrical equipment in the form of transformers (2 or 3 pieces).
Network connection diagram via 3 transformers
Possible malfunctions and their elimination
Malfunctions of the device during its operation may be minor. This, for example, stops the light indication while the meter is running.
The malfunction may be caused by a loose connection of the terminal contacts. The electricity meter is turned off and the contact connections are strengthened. The device is turned on again and the light indication is checked. If the indicators do not light up, the meter will need to be returned to the appropriate service department.
If the metering device fails, under no circumstances should you open the meter and try to repair it yourself. If this happens, the consumer may face serious liability problems for violating the sealing of the electric meter and be subject to significant penalties.
How to take readings
First you need to know the capacity of the device. Old-style TsE6803 meters (production period from 1997 to 1999) with a calibration interval of 8 years have 7 digits on the display (windows with numbers). Later models are equipped with 8-digit displays, so their verification interval is twice as long - 16 years.
The last digit is separated by a comma from the remaining digits. It is not taken into account when taking readings. Meter readings are taken, as a rule, once a month, recording the data in a notebook. Knowing the tariff, the monthly payment for electricity is calculated. To do this, the amount of kilowatt hours is multiplied by a unit price (tariff). Paid receipts are kept indefinitely.
Seven-digit display
Additional Information. When purchasing a secondary home or building, it is important that the previous owner present a certificate of no debt on electricity. The latest electricity meter readings are recorded. The new owner resumes payments, starting to keep track of his electricity consumption, based on the latest data from the device.
How to take readings
For example, if the device model has a comma and the last right digit is separated by a red line, then you need to specify the number before this line.
If there is no comma and the last number is not framed or colored in one color, then you must enter all the numbers from the counter screen. Simply put, if there is no comma at all, then you need to write all the numbers that are on the screen.
The service life of such a device is more than 20 years. But at the same time, it is advisable to run it with a multimeter from time to time to check for errors. Sometimes, if many powerful devices are connected to the network, the meter will not cope and give incorrect readings.
Multimeter for testing
The TsE6803VM counter is quite an old model, but still relevant. It has a high accuracy class, so it is popular in the market. It can also be easily installed without calling a technician.
Varieties of TsE6308
In addition to the fact that the TsE6803v models differ in technical characteristics, they have different fastenings. The mounting method is reflected in the marking with the following alphanumeric code:
- R31;
- R32;
- Ш33.
R31, R32
The presence of a code of this type in the marking of the device means that its body is equipped with hooks. They attach the meter to the DIN rail. The lath is a metal profile in the form of a channel with a longitudinal perforation. The bracket allows you to mount TsE6803v together with circuit breakers at the same time.
DIN rail
Ш33
On the back panel of the meter there are 3 loops for fastening with bolt anchors inside the panel or cabinet. This is indicated by the designation Ш33 in the device labeling.
Certificate information
energomera-TSE6803v_p
The measuring device complies with state standards, is certified and included in the State Register of Measuring Instruments. Each type of electric meter TsE6803V has a passport, which indicates the device number, its features and technical characteristics.
The electricity meter TsE6803V from Energomera is popular and is often chosen by users among a host of other options: measurement accuracy, ease of use, quality, long calibration interval, and long operational period speak in favor of the TsE6803V meter.
Meter installation
When replacing or installing a new electricity meter, the owner of a home, office or industrial building, depending on the circumstances, is required to enter into an electricity supply agreement with the local energy supply provider. You also need to fill out documents to receive a current account to pay for consumed electricity.
The supplying organization provides the consumer with technical documentation indicating the type of electric meter, circuit breaker, wire cross-section and type of mounting (in a panel or on a DIN rail).
The provider's electrician will install the meter and connect it to the network. He also seals the device, about which an acceptance certificate is drawn up, which is signed by the energy sales representative, on the one hand, and the consumer, on the other hand.
Energy meters TsE6803v have the above-mentioned undeniable advantages over their analogues. The products have been produced for decades and have proven themselves only on the positive side.
Device service life and calibration interval
Technical characteristics of the Energomera CE101 electric meter
For Energomera electric meters, the service life is determined by the conditions under which they are constantly used. This indicator may differ significantly from the parameter specified by the manufacturer in the technical specifications (up to 30 years). This difference sometimes reaches half of the specified period.
After a certain period of time that has passed since the electricity meter was put into operation, the supplier’s service is obliged to carry out verification of the device. The calibration interval for devices of the CE 101 brand, for example, is set within the range from 8 to 16 years, depending on the year of manufacture. The specific figure is usually indicated by the manufacturer in the passport of the three-phase meter.
