How does a touch switch work - connection diagrams

If your goal is to make spectacular lighting in your apartment, move away from the usual stereotypes and look at the equipment of your apartment from a different angle, then you will be interested in learning more about such an invention in the world of electronics as a touch switch. A modern device will help you arrange your home using the Smart Home system.

Advantages of capacitive switches

Speaking about the advantages of this type of switches, the following qualities should be noted:

• Long service life. This is greatly facilitated by the absence of moving parts and contact groups.
• Compatible with all types of lighting fixtures. Models with dimming are available for LED strips and energy-saving lamps, if they have such an option. In addition, switching of any circuits that meet the operating conditions of the switches is allowed
• Availability of additional functions.
• Possibility of integration into the Smart Home system.
• Large selection of colors and designs. Switches “Hares” model range Kopou
• No mechanical contacts.
• The touch sensor can be installed in a standard “glass” for a hidden wiring switch.

Now briefly about the shortcomings. First of all, it is necessary to note the difference in cost with conventional mechanical switches, but it has become significantly less than 10-20 years ago. The price of inexpensive Chinese touchscreen models today is much cheaper than mechanical switches from well-known brands, such as GTS or Electronics.

Sometimes LED lamps connected to touch switches flicker. This may be due to both the low quality of the lighting sources themselves and the low-cost switch models. The problem can be resolved in two ways:

1. Use products from well-known brands (Jazzway, Panasonic, Sapphire, Funry, LightaLight, Tronic, Sesso, etc.).
2. Connect a 0.1 uF 630 V capacitor in parallel with the LED lamp.

Varieties

The 220 V touch light switch circuit is quite simple. Even a novice master can handle installing the sensor. There are four common modifications of such devices on sale. They differ in their set of additional functions and design. The most popular varieties are:

• With remote control. This sensor is easy to use to control LED strips, sconces, spotlights, etc.
• With timer. This is an economical variety that consumes a minimal amount of electricity. If there is no one in the apartment, the sensor will turn off the lights.
• Capacitive. The device reacts even to a light touch.
• Contactless. May react to certain features of the situation. This could be, for example, sound, temperature changes, changes in natural light levels, or movement.

Touch switches can be equipped with a dimmer. This allows you to control the brightness of the lighting.

An example of the implementation of lighting in a bedroom using Livolo pass-through switches

Task:

1. Implement control of the general lighting of the room from three places. 3 - at the entrance to the bedroom, 1 - the glory of the bed, 2 - to the right of the bed.
2. Implement control of sconces on the left of the bed and on the right of the bed.

The connection diagram for Livolo pass-through switches in this case will be as follows:

After connecting the pass-through switches, they must be synchronized to work together. See video example of synchronization above on this page.

Annotation. After connecting and synchronizing, the light control in the room will be like this:

• Lamp No. 3 is controlled from switch No. 1, No. 2, No. 3;
• Lamp No. 1 is controlled from switch No. 1
• Lamp No. 2 is controlled from switch No. 2

Other mounting options

It is necessary to consider a few more features of connecting touch switches. The pass-through switch circuit is used when installing lighting fixtures, for example, in a long corridor.

In this case, it is impossible to open the electrical circuit of the lamp at the beginning and end of the route with one switch. This would cause connection difficulties. To prevent this from happening, pass-through switches are used. They are connected according to a special circuit.

You need to purchase two pass-through switches. Their choice depends on the total power of electrical appliances.

The phase is supplied from the network, supplied first to the first and then to the second touch switch. The neutral wire comes from the opposite side. It passes through the lighting fixtures. From each lamp, a wire is connected to the corresponding terminal of the second switch (1.1 and 1.2). Then another neutral wire comes out of the same device from the “COM” terminal. It is carried out to the same terminal on the first switch. This allows you to connect two touch sensors into a single system.

Advantages of touch switches

The advantages of touch switches include:

• increasing the service life of electricity consumers (due to the possibility of smooth switching on, which eliminates even short-term operation in extreme starting mode),
• long service life,
• reliability,
• compatibility with any lighting devices (incandescent lamps and other types of lamps),
• Possibility of economical operation of consumers and power regulation.

In order for the touch lamp to live up to expectations and significantly increase the comfort of the room, it is important when choosing to take into account all your needs and determine what functions you would like to “entrust” to the device. It will be easier to formulate requirements if you answer the following questions:

• How many light sources are you planning to connect to the touch switch?
• Where are you planning to install the switch (do you need a model that is resistant to temperature changes or )?
• Are there plans to connect additional electrical appliances, and is it necessary to automatically control their operation (presence of a temperature sensor)?
• Do you need a function to automatically turn on the lights when people appear in the room and turn them off when they are absent (motion sensor)?

Legrand

Multi-brand company with a central office in France. In Russia there is not only a representative office of the company, but also a production site, however, in Dubna, where it is located, they produce only small-section cable channels. Touch switches, distinguished by good quality and functionality, are imported from abroad and have a real “imported” price: a single-channel device costs about 3.5 thousand rubles.

Livolo

Domestic products are traditionally competitive in terms of prices, however, their characteristics often leave much to be desired. The products of the Ekaterinburg company Livolo cannot be called of poor quality, however, its touch switches may not work correctly with LEDs (lamps, strips) etc. But the price of a three-channel device is less than that of a single-channel imported device - 2.1-2.3 thousand rubles.

Technologies do not stand still, and now we already have a touch switch in wide use, which allows us to take the lighting control system in the house to a fundamentally new level.

Our article will tell you why such a device is needed, what it is and how it works. Thanks to this, you can make a touch switch with your own hands for 12 or 220 volts without any problems, and the connection itself, both a home-made device and a purchased one, will not be difficult.

Disadvantages of use

Like any technology, touch switches have certain disadvantages. If we are talking about things that change their state from contact with human skin, then ensuring better electrical contact comes to the fore. With various non-conductive intermediaries (gloves, napkins, cloth), it will not be possible to trigger. Moreover, this practically does not depend on the type of detector - be it induction, resistive, or built on the principles of heat detection. Those working on the basis of the intersection of a ray of light or its change are free from this disadvantage. But they have something else - they strongly depend on the cleanliness of the optical system of the device itself and the current flow rate in the room. That is, if the switch is built on the principle of covering a photoresistor with a finger that captures an external light source, then where it is constantly dark its functionality will be limited.

In general, the cleanliness of contact pads or touch points is a fairly wide problem area for touch switches. They must be periodically washed and dust, dirt and grease deposits that interfere with the operation of the detector must be removed from their surface.

Device options and capabilities

The development of a touch switching product equipped with a timer clearly deserves special consideration. There are traditional characteristics here, such as:

• silent operation;
• interesting design;
• safe use.

In addition to all this, another useful feature is added - a built-in timer. With its help, the user is able to control the switch programmatically. For example, set on and off times in a certain time range.

A unique option for developing a switch with integrated timer functionality. With the help of such devices, it is possible to control lighting at a strictly specified time. Electricity savings are obvious

As a rule, such devices have not only a timer, but also an accessory of another kind - for example, an acoustic sensor.

In this embodiment, the device works as a motion or noise controller. It is enough to raise your voice or clap your palms and the lamps in the apartment will light up with a bright light.

By the way, in case the brightness is too high, there is another functionality - dimmer adjustment. Touch-type switches equipped with a dimmer allow you to control the light intensity.

Modification of touch devices – acoustic switch. It operates according to a slightly different method, but is also a device that supports technologies for using sensors. In this case, the sensor element is a sensitive microphone

True, there is one caveat for such developments. Dimmers, as a rule, do not support the use of fluorescent and LED lamps in luminaires. But eliminating this shortcoming is most likely a matter of time.

Operating principle

The touch sensor sends an alert to the electronic board. Vibrations in it increase and change, creating an electrical surge. A short burst of electrical voltage causes a circuit to close or open. This reaction allows the device to connect and disconnect. The load can be applied in stages, this regulates the light intensity. This is possible with prolonged touching. Devices with similar functions have dimmers.

Good to know! Touch switches equipped with a dimmer imply the use of halogen, LED and standard lamps.

Diagrams and tips for connecting a 220 V device with your own hands

Switch on trigger

factory devices have complex, often incomprehensible circuits for the average person

Important The main element of the circuit is the K561TM2 microcircuit, which radio amateurs very often use. This part is a trigger, which will change its state upon receiving a control signal. Therefore, such a phenomenon is best suited to implement the switch option

Therefore, such a phenomenon is best suited to implement the switch option.

The principle of operation of the circuit:

1. The plate is touched.
2. An electrical signal is received at the input.
3. The trigger is switched by a field effect transistor.
4. The signal is multiplied and transmitted to open the thyristor.
5. The lamp included in the thyristor circuit turns on.

Based on infrared sensor

• relay;
• photodetector;
• IR LED;
• regular LED.

• DD1 – as a signal generator;
• DD2 – as a system counter.

Attention For a certain period of device waiting time, it is necessary to select a detail of the appropriate parameters. separate article

Touch Switch Parts

All resistors are MLT or S2-33 type. Transistor VT1 - KP501 with any letter, or it is possible to use KP7131A9. Zener diode VD1, which has a stabilization voltage of 6...12V, can be replaced with D814A, KS 175A, D808. Oxide capacitor C1 - K50-24, K50-29. Rectifier diodes VD2-VD5 with a reverse voltage of at least 300V are replaceable with diodes D112-16, KD226V. The HL1 incandescent electric lamp is designed for a voltage of 220V. Transistor VT2 can be replaced with KT815B - KT815G, KT940B - KT940G, KT630A - KT630V.

The touch switch is assembled on a printed circuit board and installed in a plastic case of a suitable size. When soldering elements, you need to ensure that the leads of the radio components are short (to reduce the impact of interference).

If there is a need to change the sensitivity of the sensor, this can be done by selecting the required resistance R2. The sensor can be made from any metal with a diameter of at least 3 cm.

This touch-sensitive light switch allows you to turn on and off a lighting source with a power of no more than 60W. At higher power, the thyristor must be placed on the radiator.

Installation behind the mirror

In the bathroom or in the hallway, you can install a touch-sensitive light switch with your own hands behind the mirror. The connection diagrams for such devices do not differ from those for conventional mechanical varieties. This switch is mounted behind the mirror surface.

This device works without touching the glass or sensor panel. It has an electronic unit and an infrared sensor. By moving your hand into the control field of the sensitive element, you can turn on the light. When moving again, the load will be disconnected. This allows you to create an interior without a switch. For a bathroom, especially in a public institution, this is extremely important. And for home use, such a device will be a good purchase.

Choosing the optimal model

The main determining indicator for the full operation of a touch switching device is the characteristics of the electrical network. The required voltage of 220 V is not suitable for all models. There are options with a deviation of 20-30%.

Therefore, when choosing, you should pay attention to the threshold voltage values ​​indicated in the device characteristics. In case of significant deviations, it will be necessary to additionally install a stabilizer, through which the vibrations will be leveled

In order for the purchase of an electronic switch to meet all expectations and the device to significantly increase the level of comfort in the room, when choosing, you should take into account the necessary functionality that the device must have

To determine the appropriate model of a sensor product, it is necessary to take into account the priority capabilities that are necessary:

1. The number of groups of light bulbs connected to the regulator - there can be one, two or three.
2. Intensity. Some devices are additionally equipped with a dimmer, which changes the current supplied to the light bulbs.
3. Built-in timer. In walk-through models, an automatic shutdown timer is installed that operates after a specified time. These devices are mostly used for corridors and staircases.
4. Control method. It all depends solely on the preferences of the buyer. There are devices controlled by remote control, touch, sound, etc.

Having decided on the set of necessary functions, you should choose one of the presented manufacturers. The price category of devices is not cheap, therefore, when purchasing a low-cost product, you may encounter a low-quality analogue.

The Belgian brand Basalte is focused on luxury products. The Deseo model is the embodiment of multifunctionality and exquisite design. Almost all products have LED backlighting

The Belgian company Basalte produces high-quality touch control devices. The developments are focused on consumers with the highest demands.

Elite models are distinguished not only by their original design, but also by one of the highest price categories. Nevertheless, the cost is fully compensated by ease of use, the presence of various functions and simple adjustments.

Despite the fact that many buyers are biased towards Chinese products, Livolo was able to prove the quality characteristics of its products

Among the Chinese representatives, the company Livolo is noted. The main advantages of touch switches of this brand are the affordable cost of products and original design solutions for home improvement that can emphasize individuality.

At the same time, the range is not limited to technically simple models. It is also worth noting the constant replenishment of the assortment.

We also recommend reading our other material, where we talked in detail about how to assemble a touch switch yourself.

Marking

It is imperative to consider the features of application, installation, and connection diagrams of touch switches before purchasing. Livolo is one of the most famous manufacturers of the equipment presented. This company produces touch sensors of various types. To understand what qualities a switch has, you need to look at its markings.

When studying the circuit diagram of a touch switch from Livolo and other manufacturers, you should consider the decoding of the designation using the example of the VL C702R model presented by the company.

The first two letters of the marking, VL, are the name of the Chinese brand Livolo. Next comes the letter C7, but it could also be C6, C8. This is a device modification. Next you can see the numbers 01, 02 or 03. This is the number of lighting groups that can be connected to this device. Compared to a mechanical switch, these could be devices with one, two or three keys.

In the marking, the last letters indicate additional functions of the device. So, the letter R is lit, indicating that the sensor is controlled using a radio signal. The letter D in the marking indicates the presence of a dimmer function, there is brightness adjustment, and the letter S is a pass-through switch. The presence of the letter T in the marking indicates that the manufacturer has included a timer in the model.

Features of work

Before considering the connection diagram for touch switches, you need to understand the operating principle of this device. Any device of the presented type is a sensor. He reacts even to a slight touch. The human body has a weak electrical charge. Therefore, it can be detected by a sensitive sensor.

The presented device consists of several required components, such as:

• A highly sensitive element that responds to a person approaching or touching the sensor surface.
• A signal amplifier, which is assembled on microcircuits or semiconductors.
• A switching device that includes a load, such as a mini-relay or thyristor.

Experts say that devices whose circuit includes a thyristor are more reliable. This is due to the absence of a contact part. Over time, the latter may oxidize or burn.

Setting up the control panel

Touch switches look really very stylish - they will look great in the living room, in the hallway, in the kitchen, and anywhere. Another good thing about such devices is that they can be controlled remotely. To do this, you just need to order a universal remote control online. The price of this device, which is a keychain with a carabiner and a metal front panel, is not so high.

There are four buttons on the remote control panel, they are designated in Latin letters - A, B, C, D. This device operates on a 27A battery with a voltage of 12 volts. This remote control is compatible with a variety of touch switches, in particular, with the popular LIVOLO switches of the C6 and C7 series.

Setting up this remote control is quite simple. First of all, you need to press the touch switch button (while it itself must be in the “off” position) and hold it until the “Pi” sound signal is heard from the touch device - this is about 5 seconds.

Then you should press one of the buttons on the remote control (A, B or C), as a result of which another sound signal should be heard - it means that the “binding” procedure is completed. Now the button that we pressed on the remote control during binding can be controlled (disabled, enabled) by touch switches at a distance. All other buttons on the switches are linked to the remote control in exactly the same way.

It is worth noting that several touch devices can be assigned to one button on the remote control. That is, several buttons and even several remote controls can be linked to one sensor. There is information on the Internet that you can make 8 such bindings (I haven’t tried it myself).

Detaching the sensor from the remote control is also very simple. To do this, touch the sensor and do not release it for about ten seconds

After five seconds the first beep will sound, but this should not be taken into account. And only when another, second beep is heard, all previous settings will be reset

The operating range of the VL-RMT-02 universal control panel is 30 meters. This is quite enough for everyday use - the remote control will properly perform its functions throughout the entire territory of an ordinary apartment.

Connecting a single-key touch switch Livolo VL-C701R

So, let's figure out how to connect a 220 Volt touch light switch. In essence, it is no different from the connection diagram of a single-key switch.

On the switch body there are two terminals marked “L-in” and “L-load”. The “L-in” terminal, the literal abbreviation of which sounds like “live line terminal”. If we use electrical engineering translation, it means approximately the following: “live line” - live line, “terminal” - contact, contact screw. In general, this is a contact for connecting the PHASE wire (the one that came from the distribution box).

The “L-load” terminal in the instruction manual is called “lightin terminal”, translated approximately like this: “lightin” - lighting devices, “load” - load. That is, this is a contact for connecting the wire that goes to the lighting load (the wire that goes to the lamp or chandelier).

As you can see, there is nothing complicated in this “electronic miracle”, everything is like in a regular switch, two terminals “phase-input”, “phase-output”. We strip the wires to the required length and connect them to the terminals.

If you are installing a touch switch to replace the old one, simply unscrew the wires from the old one and connect it to the new one. The main thing is to decide where the phase is and connect it to the desired contact of the touch light switch ("L-in" contact).

The only thing I would recommend is that if you use a cable with a stranded core, use NShVI lugs. The touch switch has screw-type terminals, and if you push a bare stranded wire there when tightening, you can easily crush it.

This is what the Livolo switch looks like from the side

Principle of operation

The touch switch circuit for 12 V and 220 V does not have any special differences when connected. Most often, when the light is turned off, the display will have a blue backlight. If the light is turned on, it will glow red.

The signal from the sensor is fed to the amplifier. Then it goes to the performer relay. Its contacts turn off and turn on the lighting. Control can be done using the remote control. Its range is up to 30 m.

Touch switches have protection that is triggered when the network is disconnected. In this mode, there is a transition to the original off position. The executive relay can withstand loads up to 1 kW. In this case, the load current is 5 A. Such devices are designed to operate from a network of up to 250 V. If voltage surges are observed in the system, it is recommended to install a stabilizer.

Connection diagrams

Instructions for installation and operation of touch switches.

Attention! When installing touch switches, be sure to follow the following instructions:

• Installation should be carried out strictly on de-energized wiring to prevent short circuits and damage to the device.
• Install and remove the glass front panel on a de-energized mechanism.
• Do not recess the support (the metal part of the fastening with screws to the mounting box) into the wall by tightening the screws to maximum force. If it is necessary to loosen the fastening screws by half a turn, the front panel should not rest against the wall on one side and should stand strictly parallel to the wall.
• Supply power to the touch switches only when each line is under load (the output phase is connected to the consumer).
• To avoid contamination of the switch sensor and subsequent incorrect operation, place the front glass panel on the switch immediately after installation. If there is construction dust on the switch sensor, wipe it with a dry, clean cloth and immediately install the front panel.

— During installation, do not allow the metal parts of the installation tool to come into contact with the inner painted side of the front panel.

— Remove the product from the packaging, insert a flat-head screwdriver all the way into the lock located at the bottom of the front panel and turn it axially to disconnect the panel, de-energize the wiring, connect the phase to the L-in input connector, and then connect the out-L1-L2 output connectors ( depending on the number of lines in the product).

— Secure the caliper in the mounting box, connect the upper part of the front panel with the caliper so that the lock teeth fit into the grooves, then bring the lower part of the panel to the caliper and with moderate pressure on the entire plane, lock the lock until it clicks.

Connection diagram for touch switches:

Turning the lighting on and off is done by lightly touching the front panel in the illuminated area where the sensor is located; when it is off it glows blue, when it is on it glows red.

For models with dimming, turning on and off is carried out with a short touch; by adjusting the lighting power with a long touch, the power will increase, and when touched again, it will decrease. The dimmer must only be used with lamps that support dimming. It is acceptable if the dimmer heats up during operation.

Attention! When using LED lamps with a total line load of less than 15 W, the lamps may blink when turned off, in which case you will need an LED adapter

Connection diagram for a touch switch with an LED adapter next to the load:

Connection diagram for a touch switch with an LED adapter in the installation box:

Pass-through touch switches

The pass-through switches must be synchronized; to do this, hold the sensor of one switch until a sound signal, then touch the second, the backlight should blink twice.

Synchronization is reset by holding the touch for 10 seconds or more until a double signal.

Pass-through switches (switches) only work when the phase is connected to the L-in of both products, and the COM-COM connectors are connected.

Connection diagram for single-line pass-through touch switches:

Connection diagram for pass-through touch two-line switches:

Setting up radio controlled switches

To pair, hold your finger on the sensor for more than 5 seconds until you hear a beep. After the beep, press the numbered button on the remote control, repeat for the next lines. To program a scenario button, connect all the necessary lines to one of these remote control buttons according to the algorithm described above. To reset the settings, hold the sensor for more than 10 seconds until you hear a double beep.

TOP 5 manufacturers

Sesoo touch switches - instructions, modification and repair

Among the companies producing electrical equipment, Sesoo can be noted. This company produces devices for the Broadlink smart home system.

These devices are installed and programmed in the same way as other devices.

When you connect an energy-saving lamp to this device, it may begin to “blink.” This is due to the charge of the capacitor inside the electronic ballast. To solve this problem, you need to solder a 200 kOhm resistor into the lamp, parallel to the capacitor.

The sensor's working area is small and limited by a glowing ring (blue when off and red when on). To expand this area, solder a wire to the contact to which the sensor is soldered and lay it along the edge of the protective glass. This will expand the area in which the sensor responds to touch.

Repair of such devices comes down to finding and replacing faulty parts. The most common problem is a burnt or broken triac.

GC "Flexi" - 3 types of mirrors of the MixLine brand pearl d770 with touch switch

Every bathroom has a mirror. Many of them are equipped with lighting. The Russian one offers a collection of “Premier” mirrors from the Mixline brand:

• With external lighting. Lamps mounted on a frame or wall are used.
• With internal lighting. Lighting fixtures are installed on the back side of the frame. For lighting, part of the mirror is not covered with amalgam. It can take the form of a pattern or geometric shapes.
• With LEDs.

All mirrors can be equipped with touch switches and motion sensors.

S.V. Legrand

The products of the French company Legrand are widely known in the world for their quality and range. Sockets, automatic devices, dimmers and other equipment for the smart home system are distinguished by their reliability and innovative solutions.

S.V. Livolo

The products of the Chinese manufacturer operate at voltages up to 250V with a large number of lamps. The black and white protective panel is made of crystal. Some models work with a separately purchased remote control.

How to assemble?

• on reading simple electrical circuits;
• experience with a soldering iron;
• ability to understand electrical and radio components;
• practice in the manufacture of printed circuit boards.

The switch will operate at 9 volts. A rectangular battery is suitable as a power source, but it can be replaced with a battery. When using a step-down transformer or DC-DC converter, you can operate from a 220 W network.

Advice If you do not have the skills or qualifications, it is better not to try to do it yourself. For such people, there is a huge selection of ready-made options.

Parts List

Resistors:

• R1– 10K;
• R2– 1M;
• R3– 22K;
• R5– 2K;
• R6– 1.8K;
• R7– 330 Ohm;
• R8– 1.5K.

Transistors:

• VT1–KT315;
• VT2–RT315;
• V3– 3107 (DC557).

Capacitors:

• C1– 2200 pF;
• C2– 1 µF*10V.

Diode - VD1– 1N.

Miscellaneous:

• M1 - electrical chip;
• HL1 – LED or relay;
• contact block.

Attention: If a relay is used as a load, then resistor R8 must be changed to 2 Ohms

Printed circuit board

Small blank, designed for DIP components. Selecting a case will not take much time. The manufacturing process is not easy, it takes more than one hour. There is enough information on this issue on the Internet. Design is carried out in the Spirint-layout 6.0 program. The manufactured board is shown in photo 1.

Treat the paths with tin. It will protect the surface from oxidation.

An example of the produced coating is in photo 2.

report on the practice of JSC Tander Shop Magnet

Download circuit diagram hic touch-on switch model yf-6 fb2

Guys, I’ll post it here, maybe it will be useful to someone, the MF switching circuit. By using SMD components you can significantly reduce the area of ​​this switch.

Hic touch-on switch TIAN YU TYA 60W (ELECTRICAL FACTORY). Sensor TIAN YU TYA (Hic touch-on switch). XIONG DA. Touch switch XIONG DA XD W (ZHONGSHAN XIAOLAN XIONGDA ELECTRIC APPLIANCES FACTORY). Sensor YUANDA YF-6 (Hic touch-on switch). Marking of sensor boards for table lamps: HT-2B1-A, YCD , DS HS-3, DX, E, YF HF96 , CE, PCB-TCD E, JN E, EHA1, E, AR, PCEHA01, SL Contact us: Your name: (required). Tell me what the reason is. There is a table touch lamp that has stopped working. It turns on by touch; it contains a hic touch-on switch board.

Model: YF Stopped turning on completely. I checked the power wire, all the resistors on the board, everything is fine. There is still a blot on the microcircuit, maybe there is a problem with it. Tell me where to start. Quote. Share message. Search for: “hic touch-on switch yf-6” Added words from the dictionary: “selector switch”. Found: Output: Including: switch(); hic(1); yf6(0); touch(0). Touch Switch. hayadat.ru Touch Switch. Schemes" Household. Touch change operated over switch.